John Deere S550, S660, S670, S680, S685, S690 STS Combine Repair Manual (TM112019)

The John Deere S550 STS, S660 STS, S670 STS, S680 STS, S685 STS, and S690 STS Combine Repair Service Manual (PN TM112019) provides comprehensive repair instructions for these combine models. It covers detailed procedures for diagnosing and repairing the engine, electrical systems, hydraulics, transmission, and harvesting components. With clear illustrations, step-by-step guidance, and technical specifications, the manual ensures accurate and efficient repairs. Essential for professional technicians, it helps maintain the combines' reliability, performance, and productivity, reducing downtime and ensuring optimal operation in the field.

DOWNLOAD NOW JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019)

File Format: PDF

Size: 78.98 MB

No. of pages: 2622

Delivery Method: Instant Download – Access your file immediately after purchase.

📑 Table of Contents:

- FOREWORD
- Section 10 - GENERAL
- Group 05 - Safety
- Recognize Safety Information
- Understand Signal Words
- Remove Paint Before Welding or Heating
- Handle Fluids Safely—Avoid Fires
- Prevent Battery Explosions
- Handling Batteries Safely
- Prepare for Emergencies
- Prevent Acid Burns
- Avoid High-Pressure Fluids
- Service Accumulator Systems Safely
- Wait Before Opening High-Pressure Fuel System
- Park Machine Safely
- Support Machine Properly
- Wear Protective Clothing
- Service Machines Safely
- Work In Ventilated Area
- Illuminate Work Area Safely
- Replace Safety Signs
- Use Proper Lifting Equipment
- Service Tires Safely
- Avoid Harmful Asbestos Dust
- Work in Clean Area
- Practice Safe Maintenance
- Use Proper Tools
- Construct Dealer-Made Tools Safely
- Avoid Heating Near Pressurized Fluid Lines
- Decommissioning: Proper Recycling and Disposal of Fluids and Components
- Use Adequate Service Facilities
- Live With Safety
- Servicing Electronic Control Units
- Welding Near Electronic Control Units
- Precautions for Welding
- Keep Electronic Control Unit Connectors Clean
- Clean Exhaust Filter Safely
- Group 10 - Specifications
- Operating Speeds—S550 STS™
- Operating Speeds—S660 STS™
- Operating Speeds—S670 STS™
- Operating Speeds—S680 STS™, S685 STS™, and S690 STS™
- Specifications—S550 STS™
- Specifications—S660 STS™
- Specifications—S670 STS™
- Specifications—S680 STS™, S685 STS™, and S690 STS™
- Dimensions—S550 STS™
- Dimension Reference Points—S550 STS™
- Dimensions—S660 STS™ (Grain Tank Extensions)
- Dimension Reference Points—S660 STS™ (Grain Tank Extensions)
- Dimensions—S660 STS™ (Grain Tank Covers)
- Dimension Reference Points—S660 STS™ (Grain Tank Covers)
- Dimensions—S670 STS™ (Grain Tank Extensions)
- Dimension Reference Points—S670 STS™ (Grain Tank Extensions)
- Dimensions—S670 STS™ (Grain Tank Covers)
- Dimension Reference Points—S670 STS™ (Grain Tank Covers)
- Dimensions—S680 STS™, S685 STS™, and S690 STS™ (Grain Tank Extensions)
- Dimension Reference Points—S680 STS™, S685 STS™, and S690 STS™ (Grain Tank Extensions)
- Dimensions—S680 STS™, S685 STS™, and S690 STS™ (Grain Tank Covers)
- Dimension Reference Points—S680 STS™, S685 STS™, and S690 STS™ (Grain Tank Covers)
- Unified Inch Bolt and Screw Torque Values
- Metric Bolt and Screw Torque Values
- Sealants and Adhesives Cross-Reference Chart
- Face Seal Fittings Assembly and Installation—All Pressure Applications
- Metric Face Seal and O-Ring Stud End Fitting Torque Chart—Standard Pressures
- Metric Face Seal and O-Ring Stud End Fitting Torque Chart—High Pressure Applications
- SAE Face Seal and O-Ring Stud End Fitting Torque Chart—Standard Pressures
- SAE Face Seal and O-Ring Stud End Fitting Torque Chart—High Pressure Applications
- Four Bolt Flange Fittings Assembly and Installation—All Pressure Applications
- SAE Four Bolt Flange Cap Screw Torque Values—Standard Pressure Applications
- SAE Four Bolt Flange Cap Screw Torque Values—High Pressure Applications
- Group 15 - Tune-Up and Adjustment
- Tune-Up and Adjustment
- Care and Maintenance of Belts
- Defective Belts
- Prevent Hydraulic System Contamination
- Check Oil Lines and Fittings
- Basic Electrical Component Handling / Precautions For Vehicles Equipped With Computer Controlled Systems
- Programming Control Units
- Group 20 - Fuels and Lubricants
- Handle Fuel Safely—Avoid Fires
- Handling and Storing Diesel Fuel
- Diesel Fuel
- BioDiesel Fuel
- Lubricity of Diesel Fuel
- Testing Diesel Fuel
- Diesel Engine Coolant (engine with wet sleeve cylinder liners)
- Operating in Warm Temperature Climates
- Supplemental Coolant Additives
- Additional Information About Diesel Engine Coolants and John Deere LIQUID COOLANT CONDITIONER
- Testing Diesel Engine Coolant
- Diesel Engine Break-In Oil — Non-Emissions Certified and Certified Tier 1, Tier 2, Tier 3, Stage I, Stage II, and Stage III
- Diesel Engine Oil — Tier 3 and Stage III
- Oilscan™ and CoolScan™
- Hydrostatic Drive System, Main Hydraulic System, Main Engine Gear Case, Tracks Tension, Mid and Rear Roller Hubs Oils
- Transmission (Non Two Range Automatic Transmission Machines), Final Drives, Tracks Drive Gear Case, Loading Auger, Primary Countershaft and Two-Speed Separator Drive Gear Case
- Feeder House Reverser Gear Case
- Grease
- Brake Fluid
- Lubricant Storage
- Alternative and Synthetic Lubricants
- Mixing of Lubricants
- Section 20 - ENGINE
- Group 05 - Remove and Install Engine
- Essential or Recommended Tools
- Specifications
- John Deere Engine Repair—Use CTM
- Remove Engine—6.8 L
- Install Engine—6.8 L
- Remove Engine—9.0 L
- Install Engine—9.0 L
- Remove Engine—13.5 L
- Install Engine—13.5 L
- Remove and Install Fan Drive Bearing and Support—13.5 L Engine
- Remove and Install Flywheel Pilot Bearing
- Remove and Install Aftertreatment Device Assembly
- Group 10 - Cooling System
- Essential or Recommended Tools
- Other Material
- Specifications
- John Deere Engine Repair—Use CTM
- Rotary Screen Drive Exploded View
- Rotary Screen Idler Arm and Sheaves Exploded View
- Remove and Install Upper and Lower Air Scoops—Style A
- Remove and Install Air Scoop Panel—Style B
- Remove and Install Service Door Panel
- Rotary Screen Exploded View—Style A
- Rotary Screen Exploded View—Style B
- Remove and Install Rotary Screen
- Remove and Install Rotary Screen Door
- Adjusting Rotary Screen Knife Comb
- Vacuum Fan Assembly Exploded View
- Remove and Install Vacuum Fan Jackshaft—Style A
- Remove and Install Vacuum Fan Jackshaft Drive Pulley Hub Assembly—Style B
- Remove and Install Vacuum Fan Assembly
- Remove and Install Vacuum Fan Impeller
- Remove and Install Vacuum Fan Housing
- Remove Cooling Package
- Install Cooling Package
- Remove and Install Oil Cooler—Style A
- Remove and Install Oil Cooler—Style B
- Remove Radiator—Style A
- Install Radiator—Style A
- Remove Radiator—Style B
- Install Radiator—Style B
- Variable Speed Fan Drive and Driven Assembly Exploded View
- Replace Variable Speed Fan Drive Belt
- Remove and Install Variable Speed Fan Drive Assembly
- Disassemble and Assemble Variable Speed Fan Drive Assembly
- Remove and Install Variable Speed Fan Driven Assembly
- Disassemble and Assemble Variable Speed Fan Driven Assembly
- Lubricate Variable Speed Fan Drive and Driven Assemblies
- Remove and Install Surge Tank
- Test Surge Tank Cap
- Section 30 - FUEL AND AIR
- Group 05 - Air Intake System
- Other Material
- Specifications
- John Deere Engine Repair—Use CTM
- Remove and Install Charge Air Cooler—Style A
- Remove and Install Charge Air Cooler—Style B
- Cleaning Charge Air Cooler
- Group 10 - Diesel Fuel System
- Other Material
- Remove and Install Fuel Tank Shutoff Valve
- Remove and Install Fuel Prefilter
- Remove and Install Fuel Tank
- Replace Fuel Tank Wear Strips
- Remove and Install Fuel Cooler—Style A
- Remove and Install Fuel Cooler—Style B
- Remove and Install Fuel Tank Strainer and Breather
- Replace Cold Weather Starting Aid Canister
- Remove and Install Cold Weather Starting Aid
- Section 40 - ELECTRICAL SYSTEM
- Group 05 - Batteries
- Service Equipment and Tools
- Other Material
- Specifications
- Prevent Battery Explosions
- Handling Batteries Safely
- Prevent Damage to Electrical Systems
- Checking Electrolyte Specific Gravity
- Remove and Install Batteries—Style A
- Remove and Install Batteries—Style B
- Battery Vent Hose Replacement—Style B
- Connecting Booster Batteries
- Charging Batteries
- Connecting Battery Cables
- Group 10 - Harness and Connector Repair
- Essential or Recommended Tools
- Other Material
- Use Electrical Insulating Compound
- Using High-Pressure Washers
- Electrical System Visual Inspection
- Basic Electrical Component Handling / Precautions for Vehicles Equipped with Computer Controlled Systems
- Electrical Connector / Wiring Harness Handling and Repair
- Repair Procedure
- Group 15 - Wire Harness Routing
- Replace Harness
- Cab Main Wiring Harness
- Cab Roof Wiring Harness
- LC1 Wiring Harness—Closed Center Hydraulics
- LC1 Wiring Harness—Open Center Hydraulics
- LC2 Wiring Harness—Closed Center Hydraulics
- LC2 Wiring Harness Open—Center Hydraulics
- Right-Hand Main Wiring Harness—Closed Center Hydraulics
- Right-Hand Main Wiring Harness—Open Center Hydraulics
- Engine Deck Wiring Harness
- Group 20 - Controllers and Power Distribution
- Fuse Identification
- Remove and Install HVAC Power Module
- Remove and Install Right and Left Power Modules
- Remove and Install Cab Power Module
- Remove and Install Modular Telematics Gateway Control Unit
- Programming Control Units
- Group 25 - Lighting
- Specifications
- Safety Rules When Replacing Halogen Bulbs
- Safety Rules When Replacing High Intensity Discharge (HID) Xenon Bulbs
- Cab Halogen Round Headlight Bulb Replacement and Adjustment
- Cab Halogen Oval Light Bulb Replacement and Adjustment
- High Intensity Discharge (HID-Xenon) Light Replacement and Adjustment
- Remove and Install High Intensity Discharge (HID-Xenon) Ballasts (If Equipped)
- Auxiliary Field, Access Door, Unload Auger and Work Light Bulb Replacement
- Side Finder Light Bulb Replacement
- Rotary Beacon Bulb Replacement
- Rear Hazard, Marker, Brake, and Turn Signal Light Bulb Replacement
- Cleaning Shoe Light Bulb Replacement
- Dome Light Bulb Replacement
- Header Flood Light Bulb Replacement (If Equipped)
- European Low Beam Driving Light Bulb Replacement and Adjustment (If Equipped)
- Remove and Install Header Flood Light Housing (If Equipped)
- Remove and Install European Low Beam Driving Light Housing (If Equipped)
- Remove and Install Grain Tank Light Assembly
- Group 30 - Operators Station
- Instruments and Controls Identification
- Remove and Install Overhead Console
- Remove and Install Radio
- Remove and Install Radio Speaker
- Remove and Install Radio Antenna Base Assembly
- Remove and Install Mobile Radio Antenna
- Remove and Install Modular Telematics Gateway Antenna
- Replace Corner Post Display
- Remove and Install Auxiliary Power Outlet Strip
- Armrest Console Connector Locations
- Remove and Install Side Console
- Remove and Install Multi-Function Lever
- Remove and Install Armrest Display Unit
- Remove and Install Header and Separator Engage Switches
- Remove and Install Dial-A-Speed and Active Header Control Switches
- Remove and Install Armrest Console Switch Panel
- Remove and Install Multi-Function Lever Position Switches
- Remove and Install Ignition Switch
- Remove and Install Starting Aid Switch
- Remove and Install Steering Column Lever
- Remove and Install Remote Mirrors
- Remove and Install Remote Mirror Adjustment Switch
- Remove and Install Heated Mirror Switch
- Remove and Install Hands Free Microphone
- Remove and Install Map Light Assembly
- Group 35 - Sensors and Switches
- Essential or Recommended Tools
- Other Material
- Specifications
- Shaft Speed Sensor Locations
- Remove and Install Ground Speed Sensor
- Remove and Install Low Shaft Speed Sensor
- Remove and Install STS Rotor Speed Sensor
- Remove and Install Full Grain Tank Sensor
- Remove and Install Straw Spreader Speed Sensor
- Remove and Install Tailings Sensor
- Remove and Install (Shoe/Separator) VisionTrak™ Sensors
- Remove and Install Concave Position Sensor
- Remove and Install Header Height, Lateral Tilt, Rear Tag Axle, and Chop-to-Drop Door Position Sensors
- Remove and Install Multi-Function Lever Feed Rate Sensor
- Remove and Install Hydraulic Reservoir Temperature Sensor
- Remove and Install Coolant Temperature Sensor
- Remove and Install Surge Tank Level Switches
- Remove and Install Fuel Level Sensor
- Remove and Install Park Brake Switch
- Steering Input Device Sensor
- Remove and Install Air Filter Restriction Switch
- Remove and Install Accumulator Charge Pressure Sensor
- Remove and Install Engine Gear Case Temperature and Pressure Switches
- Remove and Install Hydrostatic Charge Pressure Switch—Open Center Systems
- Remove and Install Hydrostatic Charge Pressure and Direction Pressure Switches—Closed Center Systems
- Remove and Install Hydraulic Reservoir Filter Sensor—Closed Center Systems
- Remove and Install Evaporator Temperature Sensor
- Remove and Install Air Temperature Sensors
- Remove and Install Variable Speed Fan Driven Sensor
- Remove and Install Switches in the Ground Level Switch Bank
- Remove and Install Grain Tank Cover Actuator Arm Position Sensor
- Remove and Install Header Height Arm Position Sensor
- Remove and Install Horizontal Unloading Auger Arm Position Sensor
- Remove and Install Lateral Tilt Position Sensor
- Remove and Install Top Cover Vanes Linkage Position Sensor
- Disassemble and Assemble Arm Position Sensors
- Remove and Install Wheel Angle Sensor
- Remove and Install Folding Horizontal Auger Sensor
- Remove and Install Chopper Position Sensor — Style A
- Remove and Install Chopper Position Sensor — Style B
- Remove and Install Chassis Tilt Sensor
- Group 40 - Wiper
- Other Material
- Specifications
- Remove and Install Windshield Wiper Arms
- Remove and Install Windshield Wiper Motor
- Remove and Install Windshield Washer
- Adjust Windshield Wiper Arms
- Group 45 - Alternator
- Essential or Recommended Tools
- Specifications
- John Deere Engine Accessories—Alternator Repair
- Remove and Install Alternator and Alternator Belt
- Remove and Install Alternator Pulley
- Group 50 - Starting Motor
- Essential or Recommended Tools
- Specifications
- John Deere Starting Motor Repair
- Remove and Install Starting Motor
- Group 55 - GreenStar Components
- Specifications
- Remove and Install Mass Flow Sensor
- Moisture Sensor Assembly Exploded View
- Remove and Install Moisture Sensor Assembly
- Remove and Install Grain Moisture Sensor
- Remove and Install Proximity Switch
- Remove and Install Auger Motor
- Position Receiver and Base Exploded View
- Remove and Install Position Receiver
- Disassemble and Assemble Position Receiver
- Section 50 - POWER TRAIN
- Group 05 - Transmission and Differential—Three Speed Transmission
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove Three Speed Transmission
- Remove and Repair Shifter Forks and Shifter Cam
- Install Shifter Forks and Shifter Cam
- Remove and Install Suction Screen
- Transmission Components
- Disassemble and Repair Transmission
- Assemble Three Speed Transmission
- Install Three Speed Transmission
- Remove and Install Gearshift Lever and Linkage
- Adjust Gearshift Linkage
- Remove Transmission (PBST)
- Remove and Repair Shifter Forks (PBST)
- Install Shifter Forks (PBST)
- Remove and Install Transmission Lube Pump
- Push Button Shift Transmission (PBST) Exploded View
- Disassemble and Repair Transmission (PBST)
- Assemble Transmission (PBST)
- Remove and Install Park Brake Actuator (PBST)
- Disassemble and Assemble Park Brake Actuator (PBST)
- Install Transmission (PBST)
- Group 10 - Hydrostatic System—Three Speed Transmission
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Serial Number Plate
- Clean Hydrostatic Motor and Pump
- Flushing the Hydrostatic System
- Remove and Install Hydrostatic Motor
- Disassemble Hydrostatic Motor
- Inspect Parts
- Lack of Lubrication
- Abrasive Contamination
- Cavitation
- Over Speeding
- Inspect Thrust Plate
- Inspect Fixed Swashplate
- Inspect Piston Slipper
- Inspect Piston Retainer
- Inspect Cylinder Block
- Inspect Bearing Plate
- Inspect Valve Plate
- Inspect Bearing and Race
- Inspect Servo Piston
- Inspect Drive Shaft
- Replace Cylinder Block Spring
- Assemble Motor
- Remove and Install Motor Valve Block (Manifold)
- Repair Motor Valve Block
- Remove and Install Hydrostatic Pump—Three Speed Transmission
- Disassemble Drive Pump
- Assemble Drive Pump
- Replace High-Pressure Line Center Pivot O-Rings
- Disassemble and Assemble End Cover
- Repair Displacement Control Valve
- Disassemble and Assemble DisplacementControl Valve with Feed Rate (Optional)
- Electronic Proportional Displacement Control Valve Neutral Adjustment
- Remove and Install Charge Pump
- Repair Charge Pump
- Remove and Install Control Cable
- Adjust Hydrostatic Neutral Linkage
- Adjust Mechanical Displacement Control Valve Neutral
- Start-Up Procedure After Hydrostatic System Repair—Three Speed Transmission
- Group 15 - Transmission and Differential—Two-Range Automatic Transmission
- Essential or Recommended Tools
- Other Material
- Specifications
- Drain Oil
- Remove Two-Range Automatic Transmission
- Transmission Components—Overview
- Remove Brake Assemblies
- Disassemble Brake Assemblies
- Assemble Brake Assemblies
- Install Brake Assemblies
- Remove and Install Park Brake Housing
- Disassemble and Assemble Park Brake
- Remove and Install Differential Module
- Disassemble Differential Module (With Differential Lock)
- Assemble Differential Module (With Differential Lock)
- Remove Gear-Shift Planetary Drive With Clutch (Forward/Reverse)
- Disassemble and Assemble Gear-Shift Planetary Drive With Clutch (Forward/Reverse)
- Install Gear-Shift Planetary Drive With Clutch (Forward/Reverse)
- Remove and Install Countershaft
- Repair Countershaft
- Countershaft—Exploded View
- Remove and Install Filter Screen
- Replace Proportionator Pump Bushing
- Remove and Install Proportionator Motor
- Assemble Two-Range Automatic Transmission
- Install Two-Range Automatic Transmission
- Group 20 - Hydrostatic Drive Pump—Two-Range Automatic Transmission
- Essential or Recommended Tools
- Specifications
- Remove and Install Hydrostatic Pump—Two-Range Automatic Transmission
- Replace Drive Shaft Seal
- Replace Hydrostatic Drive Pump Low Pressure Valve and High Pressure Check Valves
- Replace Boost Pump Seal
- Replace Control Piston Cover Seals
- Remove and Install Control Unit
- Disassemble Pump
- Disassemble Cylinder Assembly
- Disassemble Control Piston
- Inspection Notes—Two-Range Automatic Transmission—Hydrostatic Pump
- Assemble Pump
- Install Rotary Group
- Adjust Zero Position
- Group 25 - Hydrostatic Drive Motor—Two-Range Automatic Transmission
- Service Equipment and Tools
- Essential or Recommended Tools
- Specifications
- General View
- Remove and Install Hydrostatic Drive Motor
- Replace Cover Plate Seal
- Replace Port Plate Control Seals
- Group 30 - Single Reduction Final Drive
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove and Install Final Drive
- Disassemble and Assemble Final Drive
- Adjust Spindle Bearing (Preferred Method)
- Adjust Spindle Bearing (Alternate Method)
- HillMaster Left-Hand Rocker Assembly—Exploded View
- HillMaster Right-Hand Rocker Assembly—Exploded View
- Remove and Install Left- and Right-Hand Rocker Assembly
- Group 35 - Cam Lobe Motor
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Flushing Cam Lobe Motors
- Remove and Install Cam Lobe Motor
- Remove and Install Cam Lobe Motor Control Valve
- Disassemble and Assemble Cam Lobe Motor Control Valve
- Remove and Install Steering Yoke
- Disassemble and Assemble Pivot Pins, Bushings, and Seals
- Remove and Install Solenoid Valve and Valve Block
- Remove and Install Displacement Control Valve
- Remove and Install Cam and Piston Carrier
- Remove and Install Stack Valve Seals
- Remove and Install Axle Bearings and Seals
- Group 40 - Tires and Wheels
- Essential or Recommended Tools
- Other Material
- Specifications
- Service Tires Safely
- Jacking Locations
- Remove and Install Tire
- Drive Wheel Starter Stud
- Drive Wheel Bolt Torque—Single Wheel Configuration
- Drive Wheel Bolt Torque—Dual Wheel Configuration
- Install Dual Wheels and Truss Rod
- Rear Wheel Bolt Torque
- Using Liquid Weight
- Install Axle Extension Tubes
- Remove and Install Rear Tag Axle Wheel
- Disassemble and Assemble Rear Tag Axle Wheel Hub
- Group 45 - Tracks
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove and Install Track Belt
- Remove and Install Track Drive Assembly
- Remove and Install Tracks Final Drive Gear Case
- Disassemble and Assemble Tracks Final Drive Gear Case
- Remove and Install Tracks Tension Axle
- Disassemble and Assemble Tracks Tension Axle
- Remove and Install Tracks Mid-Roller Axle
- Disassemble and Assemble Tracks Mid-Roller Axle
- Remove and Install Tracks Rear Axle
- Disassemble and Assemble Tracks Rear Axle
- Tracks Alignment
- Section 60 - STEERING AND BRAKES
- Group 05 - Steering
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove Steering Valve
- Remove and Install Steering Input Device Sensor
- Steering Valve-Closed Center Hydraulics
- Disassemble Electro-Hydraulic Open Center Steering Valve
- Assemble Electro-Hydraulic Open Center Steering Valve
- Install Steering Valve
- Remove and Install Electro-Hydraulic Closed Center Steering Valve
- Steering Column-Exploded View
- Disassemble and Assemble Steering Column
- Replace Telescoping Shaft Bearings
- Remove and Install Steering Cylinder
- Bleed Steering Cylinder
- Steering Cylinder Exploded View
- Toe-In Adjustment
- Remove and Install Steering Tie Rod Joint
- Remove and Install Tie Rod End
- Remove and Install Rear Spindle Assembly—Non-Powered
- Disassemble and Assemble Rear Spindle Assembly—Non-Powered
- Remove and Install Rear Axle Pivot Bushings
- Rear Axle Adjustment
- Remove and Install Rear Tag Axle
- Remove and Install Rear Tag Axle Wheel Support
- Remove and Install Rear Tag Axle Wheel Support Bushings
- Remove and Install Hitch
- Remove and Install Hitch Extension
- Group 10 - Brakes
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Deglazing Brake Linings
- Park Brake Release (PBST)
- Remove and Install Brake Drum
- Remove Brake Shoe
- Repair Brakes
- Assemble Brakes
- Remove and Install Master Cylinder
- Adjusting Master Cylinder
- Brake Fluid Reservoir
- Bleeding Brake System
- Remove and Install Slave Cylinders
- Disassemble and Assemble Slave Cylinder
- Disassemble and Assemble Brake Pedals
- Disassemble and Assemble Parking Brake Pedal
- Adjust Park Brake Pedal
- Group 15 - Brakes—Two-Range Automatic Transmission
- Essential Tools
- Park Brake Release—Two Range Automatic Transmission
- Bleed Service Brakes
- Disassemble and Assemble Brake Pedals—Two Range Automatic Transmission
- Service Brake Repair
- Section 70 - HYDRAULIC SYSTEM
- Group 05 - Hydraulic Reservoir
- Essential or Recommended Tools
- Specifications
- Remove and Install Hydraulic Reservoir S550 STS
- Remove and Install Hydraulic Reservoir S660 STS and S670 STS
- Remove and Install Hydraulic Reservoir S680 STS, S685 STS, and S690 STS
- Flushing Hydraulic System
- Flushing Reel/Belt Pickup Drive System
- Start-Up Procedure After Hydrostatic System Repair—After Reservoir Remove and Install
- Group 10 - Hydraulic Motors and Pumps
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove Main Hydraulic Pump
- Marking Hydraulic Pump
- Disassemble Hydraulic Pump
- Replace Seal
- Triple Main Hydraulic Pump Exploded View
- Quad Main Hydraulic Pump Exploded View
- Assemble Triple Main Hydraulic Pump
- Assemble Quad Main Hydraulic Pump
- Install Main Hydraulic Pump
- Proportionator Motor Exploded View
- Disassemble and Assemble Proportionator Motor
- Reel/Belt Pickup and Straw Spreader Pump Exploded View
- Remove and Install Reel/Belt Pickup Pump Drive
- Disassemble and Assemble Reel/Belt Pickup Pump Drive
- Remove Spreader Pump
- Install Spreader Pump
- Disassemble and Assemble Advanced PowerCast™ Spreader Pump
- Remove and Install Main Engine Gear Case Lubrication Pump
- Disassemble and Assemble Gear Pump
- Remove and Install Piston Pump
- Disassemble and Assemble Piston Pump
- Remove and Install Hydraulic Transfer Gear Case
- Disassemble and Assemble Hydraulic Transfer Gear Case
- Group 15 - Hydraulic Valves
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Disassemble and Assemble Five Speed Feeder House Drive Control Valve
- Remove and Install Hydraulic Valve Stack (HIC)
- Disassemble and Assemble Hydraulic Valve Stack (HIC)
- Disassemble and Assemble Transmission Shift Valve (PBST)
- Disassemble and Assemble Interlock Valve (PBST)
- Remove and Install Transmission Control Valve
- Remove and Repair Valves From Transmission Control Valve
- Transmission Control Valve Exploded View
- Install Valves In Transmission Control Valve
- Remove and Install Hydraulic Service Brake Valve
- Disassemble and Assemble Hydraulic Service Brake Valve
- Adjust Hydraulic Service Brake Valve
- Feeder House Multi-Coupler Valve Identification
- Disassemble, Inspect and Assemble Feeder House Multi-Coupler
- Remove and Install Variable Speed Fan Drive Valve Block
- Disassemble and Assemble Variable Speed Fan Drive Valve Block
- Remove and Install Spreader Control Valve Block—Type A
- Disassemble and Assemble Spreader Control Valve Block—Type A
- Remove and Install Spreader Control Valve Block—Type B
- Disassemble and Assemble Spreader Control Valve Block—Type B
- Remove and Install Spreader Control Valve Block—Type C
- Disassemble and Assemble Spreader Control Valve Block—Type C
- Remove and Install Grain Tank Door Valve Block
- Disassemble and Assemble Grain Tank Door Valve Block
- Remove and Install Brake Priority Valve Block (OCH with Two Range Automatic Transmission)
- Remove and Install Header Height Control Valve Block S550 STS, S660 STS, and S670 STS
- Disassemble and Assemble Header Height Control Valve Block S550 STS, S660 STS, and S670 STS
- Remove and Install Header Height Valve Block S680 STS, S685 STS, and S690 STS
- Disassemble and Assemble Header Height Valve Block—S680 STS, S685 STS, and S690 STS
- Remove and Install Reel Position/Platform Tilt Valve Block
- Disassemble and Assemble Reel Position/Platform Tilt Valve Block
- Remove and Install Left Front Valve Block
- Disassemble and Assemble Left Front Valve Block
- Remove and Install Primary Control Valve Block
- Disassemble and Assemble Primary Control Valve Block Without Grain Tank Doors
- Disassemble and Assemble Primary Control Valve Block With Grain Tank Doors
- Tracks Hydraulic Control Valve Exploded View
- Adjust Hydraulic Pressure For Belt Tension
- Remove and Install Tracks Hydraulic Control Valve
- Remove and Install Leveling Valve S680 STS, S685 STS, and S690 STS HillMaster
- Disassemble and Assemble Leveling Valve S680 STS, S685 STS, and S690 STS HillMaster
- Remove and Install Leveling Valve S670 STS HillMaster
- Disassemble and Assemble Leveling Valve S670 STS HillMaster
- Remove and Install Hydraulic Valve Stack (HIC) S670 STS HillMaster
- Disassemble and Assemble Hydraulic Valve Stack (HIC) S670 STS HillMaster
- Remove and Install Rear Tag Axle Valve
- Disassemble and Assemble Rear Tag Axle Valve
- Group 20 - Hydraulic Cylinders
- Other Material
- Specifications
- John Deere 100 Series Hydraulic Cylinder Repair—Use CTM
- Remove and Install Header Lift Cylinder
- Disassemble and Assemble Header Lift Cylinder—Style A
- Disassemble and Assemble Header Lift Cylinder—Style B
- Remove and Install Unloading Auger Swing Cylinder
- Unloading Auger Swing Cylinder Exploded View
- Adjust Unloading Auger Swing Cylinder
- Remove and Install Unloading Auger Drive Cylinder
- Disassemble and Assemble Steering Cylinder
- Remove and Install Grain Tank Cover Actuator Cylinder
- Remove and Install HillMaster Tilt Cylinders
- HillMaster Tilt Cylinder Repair
- Remove and Install Check Valve Components
- Compensating Valve Components
- Compensating Valve Installed in Piston
- Remove and Install HillMaster Lower Header Tilt Cylinder
- Remove and Install Suspension Hydraulic Cylinders
- Remove and Install Mid-Roller Hydraulic Cylinders
- Remove and Install Tension Cylinder
- Remove and Install Rear Tag Axle Cylinders
- Group 25 - Accumulators
- Essential or Recommended Tools
- Accumulator (General Information)
- Checking Accumulator Pressure
- Accumulator Precharge Pressures
- Section 80 - SEPARATOR SHELL
- Group 05 - Gull Wing Doors
- Other Material
- Remove and Install Gull Wing Doors
- Remove and Install Rear Wall Panel
- Composite Panel Repair
- Align Gull Wing Doors
- Remove and Install Engine Platform Ladder
- Group 10 - Fiberglass Repair
- General Information and Materials
- Repair Surface Scratches and Gouges
- Preparing Backing Patch
- Using Backing Patch
- Repair Small Cracks
- Repair Small Fractures
- Repair Large Fractures
- Finishing Surface
- Section 90 - OPERATOR STATION
- Group 05 - Air Conditioning System (R134a)
- Essential or Recommended Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Service Parts Kits
- Hose and Tubing O-Ring Connection Torques
- Discharge and Recovery of Air Conditioning Refrigerant
- Test Volumetric Efficiency
- Leak Testing Air Conditioning System With Dye
- Test Shaft Seal Leakage
- Check Clutch Hub Clearance
- Inspect Compressor Manifold
- System Information
- Flush Air Conditioning System
- Purge Air Conditioning System
- Evacuate Air Conditioning System
- Compressor Oil Information
- Determine Correct Oil Charge
- Check Refrigerant Oil Charge
- Charge Air Conditioning System
- Group 10 - System Components
- Essential or Recommended Tools
- Other Material
- Specifications
- Heating, Ventilating, and Air Conditioning System—HVAC (General Information)
- Remove and Install Receiver/Dryer
- Remove and Install Pressurizer Blower Motor
- Remove and Install Recirculator Fan Motor Driver
- Remove and Install Recirculator Fan Motor
- Remove and Install Actuator Valves
- Remove and Install Climate Control Unit
- Remove and Install Heater Core
- Remove and Install Compressor—Tier 2/Stage II and Tier 3/Stage III A Engines
- Remove and Install Compressor—Interim Tier 4/Stage III B Engines
- Disassemble, Inspect, and Assemble Compressor—Tier 2/Stage II and Tier 3/Stage III A Engines
- Disassemble and Assemble Compressor Clutch—Tier 2/Stage II and Tier 3/Stage III A Engines
- Remove and Install Compressor Relief Valve—Tier 2/Stage II and Tier 3/Stage III A Engines
- Remove Condenser—Tier 2/Stage II and Tier 3/Stage III A Engines
- Remove Condenser—Interim Tier 4/Stage III B Engines
- Repair Condenser
- Install Condenser—Tier 2/Stage II and Tier 3/Stage III A Engines
- Install Condenser—Interim Tier 4/Stage III B Engines
- Remove and Install Evaporator
- Replace Expansion Valve
- Replace Air Conditioning High/Low Pressure Switch
- Group 15 - Cab
- Specifications
- Remove Cab
- Install Cab
- Remove and Install Cab Windshield
- Remove and Install Emergency Exit Glass
- Remove and Install Rear Window
- Remove and Install Lower Cab Fascia
- Remove and Install Front Portion of Cab Roof
- Remove and Install Rear Portion of Cab Roof
- Remove and Install Cab Inner Roof
- Remove and Install Cab Headliner
- Remove and Install Operator Seat
- Remove and Install Operator Air Seat Suspension
- Remove and Install Armrest Control Pivot
- Remove and Install Operator Presence Switch
- Operator Seat Exploded View
- Remove and Install Refrigerator
- Remove and Install Refrigerator Doors
- Remove and Install Refrigerator Control Unit
- Remove and Install Refrigerator Thermostat
- Remove and Install Cab Door
- Disassemble and Assemble Cab Door
- Cab Door Latch Striker
- Section 110 - FEEDER HOUSE
- Group 05 - Conveyor
- Specifications
- Remove and Install Feeder House (S550 STS, S660 STS, and S670 STS)
- Remove and Install Feeder House (S680 STS, S685 STS, and S690 STS)
- Adjust Feeder House Conveyor Chain (S550 STS)
- Adjust Feeder House Conveyor Chain (S660 STS, S670 STS, S680 STS, S685 STS, and S690 STS)
- Remove and Install Conveyor Chain
- Measure Conveyor Chain Wear
- Removing Conveyor Chain Link
- Replace Conveyor Chain Slats
- Replace Conveyor Chain Wear Strips
- Adjust Drum Height
- Remove and Install Conveyor Drum (S550 STS)
- Remove and Install Conveyor Drum (S660 STS, S670 STS, S680 STS, S685 STS, and S690 STS)
- Remove and Install Sub-Floor Assembly
- Remove and Install Mid-Floor Assembly (S550 STS)
- Remove and Install Mid-Floor Assembly (S660 STS, S670 STS, S680 STS, S685 STS, and S690 STS)
- Remove and Install Feed Plate
- Adjust Feed Plate Assembly
- Feed Plate Support Exploded View
- Group 10 - Top Shaft and Slip Clutch
- Essential Or Recommended Tools
- Other Material
- Specifications
- Remove Top Shaft Slip Clutch
- Disassemble and Assemble Top Shaft Slip Clutch
- Install Top Shaft Slip Clutch
- Remove and Install Top Shaft Supports
- Disassemble and Assemble Top Shaft
- Disassemble and Assemble Fixed Speed Countershaft
- Group 15 - Feeder House Drives and Reverser Gear Case
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove and Install Variable Drive Countershaft
- Disassemble and Assemble Upper Variable Drive Countershaft
- Remove, Repair, and Install Variable Drive Sheaves and Cams (Heavy Duty)
- Remove, Repair, and Install Variable Drive Sheaves and Cams (High Torque)
- Remove and Install Multi-Speed Feeder House Countershaft
- Remove and Install Fixed Drive Sheave
- Remove and Install Reverser Gear Case
- Remove and Install Oil Cooler
- Feeder House Reverser Gear Case Exploded View
- Disassemble and Assemble Feeder House Reverser Gear Case
- Disassemble and Assemble Reverser Gear Case Oil Pump
- Remove and Install Reverser Shift Piston
- Remove and Install Lower Shaft
- Disassemble and Assemble Fixed Speed Drive Tightener
- Disassemble and Assemble 5 Speed Drive Tightener
- Disassemble and Assemble Conveyor Drive Chain, Tightener, and Guides
- Remove and Install Feeder House Fixed Speed Drive Belt
- Remove and Install Feeder House Multi-Speed Drive Belt
- Feeder House Variable Speed Drive Belt—Replacing
- Feeder House Variable Speed Drive Belt—Adjusting
- Group 20 - Lateral Tilt Cylinder and Frame
- Other Material
- Specifications
- Lateral Tilt Cylinder Hoses and Fittings Exploded View
- Lateral Tilt Cylinder-Exploded View
- Remove and Install Lateral Tilt Cylinder
- Tilt Beam and Closure Plates Exploded View
- Remove and Install Tilt Frame
- Remove and Install Tilt Beam with Latching Mechanism
- Adjust Latching Mechanism
- Lateral Tilt Beam with Latching Mechanism—Exploded View
- HillMaster Latching Mechanism—Exploded View
- Remove Fore-Aft Tilt Frame
- Install Fore-Aft Tilt Frame
- Group 25 - Five Speed Feeder House Drive Gear Case
- Essential or Recommended Tools
- Other Material
- Specifications
- General Repair Procedures—Five Speed Gear Case
- Remove and Install Five Speed Feeder House Drive Gear Case
- Cross-Sectional View—Five Speed Feeder House Drive Gear Case
- Cross-Sectional View—Gear Case Output Shaft
- Disassemble Five Speed Feeder House Drive Gear Case
- Disassemble and Assemble Gear/Clutch Assemblies
- Assemble Five Speed Feeder House Drive Gear Case
- Section 120 - SEPARATOR
- Group 05 - Separator Repair
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove and Install Feed Accelerator and Shaft
- Remove and Install Feed Accelerator Wear Strips
- Remove and Install Separator Top Covers
- Remove and Install Separator Rails
- Remove and Install Front Rotor Bearing
- Remove and Install Stone Trap Door
- Remove and Install Rotor
- Remove and Install Rotor Torque Sensing—Driven
- Disassemble and Assemble Rotor Torque Sensing—Driven
- Remove and Install Rotor Drive Gear Case
- Disassemble and Assemble Rotor Drive Gear Case
- Remove and Install Discharge Beater Grate Section
- Remove and Install Discharge Beater Grate Frame
- Remove and Install Discharge Beater Top Covers
- Remove and Install Discharge Beater
- Remove and Install Discharge Beater Drive Hub
- Remove and Install Discharge Beater Housing
- Remove and Install Separator Grates
- Concave Inspection
- Remove and Install Concave Sections
- Adjust Concave Level
- Remove and Install Concave Adjusting Motor
- Remove and Install Concave Adjusting Tube and Sector Gear
- Remove and Install Front Bulkhead
- Remove and Install Center Bulkhead
- Repair Separator Rotor Shell
- Remove and Install Top Cover Adjustable Vanes
- Remove and Install Top Cover Vanes Actuator
- Remove and Install Top Cover Vanes Plastic Wear Strip
- Remove and Install Top Cover Vanes Sensor Linkage
- Remove and Replace RIVNUT Threaded Inserts
- Remove and Install Rotor Feed Flights
- Static Balance Rotor
- Aligning Rotor Drive Bulkhead
- Remove and Install Threshing Elements and Tines—TriStream Rotor
- Threshing Element and Separator Tine Location (TriStream Rotor Tough Grain Configuration)
- Threshing Element and Separator Tine Location (TriStream Rotor Dense Pack Configuration)
- Remove and Install Threshing Elements and Tines—Variable Stream Rotor
- Threshing Element and Separator Tine Location (Variable Stream Rotor Standard Configuration)
- Threshing Element and Separator Tine Location (Variable Stream Rotor Dense Pack Configuration)
- Group 10 - Separator Drives
- Essential or Recommended Tools
- Specifications
- Remove and Install Right-Hand Front Jackshaft
- Remove and Install Right-Hand Rear Jackshaft
- Remove and Install Primary Countershaft Bearing
- Remove and Install Primary Countershaft—Style A
- Remove and Install Primary Countershaft—Style B
- Remove and Install Primary Drive Shafts—Style A
- Remove and Install Primary Drive Shafts—Style B
- Replace Drive Shaft Carrier Bearing—Style A
- Group 15 - Residue Disposal
- Essential or Recommended Tools
- Other Material
- Specifications
- Straw Chopper Vane Settings—Powered
- Straw Chopper Tailboard—Powered
- Remove and Install Tailboard
- Straw Chopper Housing
- Remove Straw Chopper—Style A
- Install Straw Chopper—Style A
- Remove and Install Straw Chopper—Style B
- Remove and Install Chopper Raise/Lower Actuator—Style A
- Remove and Install Chopper Raise/Lower Actuator—Style B
- Remove and Install Chop-to-Drop Door Actuator
- Chopper Blades—Replacing and Configuration
- Replace Stationary Knife Blades
- Remove and Install Easy Adjust Knife Bank
- Remove and Install Crop Diverter—Style A
- Remove and Install Crop Diverter—Style B
- Replace Left-Hand Chopper Rotor Bearing—Style A
- Replace Left-Hand Chopper Rotor Bearing—Style B
- Replace Right-Hand Chopper Rotor Bearing—Style A
- Replace Right-Hand Chopper Rotor Bearing—Style B
- Remove and Install Dual Speed Chopper Sheave Assembly
- Disassemble and Assemble Dual Speed Chopper Sheave Assembly
- Remove Straw Chopper Drive Jackshaft—Style A
- Install Straw Chopper Drive Jackshaft—Style A
- Remove and Install Chopper Drive Jackshaft—Style B
- Remove and Install Chopper Drive Idler Shaft—Style B
- PowerCast™ Tailboard—Exploded View
- Remove and Install PowerCast™ Tailboard Blades
- Advanced PowerCast™ Tailboard Exploded View
- Disassemble and Assemble Advanced PowerCast™ Tailboard
- Remove and Install Straw Spreader
- Disassemble and Assemble Straw Spreader
- Remove and Install Flex Residue Overshot Beater Gear Case
- Disassemble and Assemble Flex Residue Overshot Beater Gear Case
- Remove and Install Flex Residue Overshot Beater
- Remove and Install Flex Residue Overshot Beater Wear Strips
- Remove and Install Chop-to-Drop Door
- Group 20 - Conveyor Augers, Cleaning Fan and Chaffer and Sieve Frame
- Other Material
- Specifications
- Remove and Install Conveyor Auger Drive Shaft
- Remove and Install Conveyor Augers
- Remove and Install Conveyor Auger Trough
- Remove and Install Conveyor Auger Slip Clutch
- Remove and Install Conveyor Auger Bulkhead
- Remove and Install Cleaning Fan Sheave And Bearing
- Fan Drive Speed Control
- Remove Cleaning Fan Drive
- Disassemble and Assemble Cleaning Fan Drive Jackshaft
- Install Cleaning Fan Drive
- Adjust Fan Speed Actuator
- Remove and Install Cleaning Fan
- Remove and Install Cleaning Fan Blade Inserts
- Remove and Install Chaffer/Sieve Frame Clevis—Self-Leveling Shoe
- Remove and Install Chaffer Element
- Remove and Install Chaffer/Sieve—Self-leveling Shoe
- Remove and Install Sieve Element
- Remove and Install Chaffer/Sieve Rear Channel Assembly—Self-Leveling Shoe
- Remove and Install Remote Shoe Actuator Motor
- Remove and Install Remote Shoe Actuator Motor—Self-Leveling Shoe
- Remove and Install Chaffer/Sieve Tilt Actuator Motor—Self-Leveling Shoe
- Remove and Install Front Chaffer Element
- Remove and Install Front Chaffer Element—With Chaffer Extension
- Remove and Install Chaffer Frame—Without Self-Leveling Shoe
- Remove and Install Chaffer Frame—With Self-Leveling Shoe
- Remove and Install Sieve Frame—Without Self-Leveling Shoe
- Remove and Install Sieve Frame—With Self-Leveling Shoe
- Remove and Install Shake Pan
- Remove and Install Shoe Pitman Arms
- Group 25 - Tailings Elevator and Augers
- Specifications
- Remove and Install Tailings Paddle Chain
- Remove and Install Tailings Paddle Chain Equipped With Active Tailings Return System
- Remove and Install Tailings Paddle
- Remove Lower Tailings Auger
- Install Lower Tailings Auger
- Remove Upper Tailings Auger
- Remove Upper Tailings Auger Equipped With Active Tailings Return System
- Install Upper Tailings Auger
- Install Upper Tailings Auger Equipped With Active Tailings Return
- Remove and Install Active Tailings Return Assembly
- Disassemble and Assemble Active Tailings Return Assembly
- Remove Tailings Elevator
- Install Tailings Elevator
- Remove and Install Tailings Elevator Equipped With Active Tailings Return System
- Group 30 - Primary Countershaft Gear Case
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove and Install Primary Countershaft Gear Case
- Disassemble and Assemble Primary Countershaft Gear Case
- Group 35 - Header Electromagnetic Clutch
- Specifications
- Remove Header Electromagnetic Clutch
- Header Electromagnetic Clutch Exploded View
- Install Header Electromagnetic Clutch
- Section 130 - GRAIN TANK AND UNLOADING SYSTEM
- Group 05 - Grain Tank Cross Augers
- Remove and Install Grain Tank Cross Augers—Style A
- Remove and Install Grain Tank Cross Augers—Style B
- Adjust Unloading Cross Auger Drive Chain
- Group 10 - Unloading Auger System Drives
- Specifications
- Remove and Install Unloading Auger Drive Belts
- Remove and Install Unloading Auger Drive Countershaft
- Group 15 - Vertical Unloading Auger and Lower Gear Case
- Essential or Recommended Tools
- Other Material
- Specifications
- Remove Vertical Auger Lower Gear Case and Vertical Auger
- Remove Vertical Auger Lower Gear Case and Vertical Auger—Heavy Duty
- Disassemble and Assemble Vertical Auger Lower Gear Case
- Disassemble and Assemble Vertical Auger Lower Gear Case—Heavy Duty
- Install Vertical Auger and Vertical Auger Lower Gear Case
- Install Vertical Auger and Vertical Auger Lower Gear Case—Heavy Duty
- Group 20 - Horizontal Unloading Auger and Gear Case
- Essential or Recommended Tools
- Other Material
- Specifications
- Inspection of Horizontal Unloading Auger
- Horizontal Unloading Auger Exploded View—Style A
- Horizontal Unloading Auger Exploded View—Style B
- Remove and Install Unloading Auger Grain Saver Door
- Remove Horizontal Auger
- Install Horizontal Auger
- Folding Horizontal Auger Housing Exploded View
- Folding Horizontal Auger Exploded View
- Folding Horizontal Auger Pivot Exploded View
- Remove and Install Folding Auger Actuator
- Remove and Install Outer Folding Auger Assembly
- Remove and Install Folding Auger Rings
- Remove Rear Horizontal Folding Auger
- Remove Front Horizontal Folding Auger
- Install Front Horizontal Folding Auger
- Install Rear Horizontal Folding Auger
- Remove Horizontal Auger Gear Case
- Unloading Auger Gear Case Exploded View—Style A
- Unloading Auger Gear Case Exploded View—Style B
- Disassemble and Assemble Horizontal Unloading Auger Gear Case
- Install Horizontal Auger Gear Case
- Remove Horizontal Unloading Auger Housing
- Install Horizontal Unloading Auger Housing
- Unloading Auger Elbow Exploded View—Style A
- Unloading Auger Elbow Exploded View—Style B
- Remove Horizontal Auger Elbow
- Install Horizontal Auger Elbow
- Remove Unloading Auger Charge Housing
- Install Unloading Auger Charge Housing
- Group 25 - Clean Grain Elevator
- Other Material
- Specifications
- Adjust Clean Grain Elevator Chain
- Remove and Install Clean Grain Paddle Chain
- Remove and Install Clean Grain Paddle
- Remove Clean Grain Elevator
- Install Clean Grain Elevator
- Remove and Install Clean Grain Elevator Gear Case
- Disassemble and Assemble Clean Grain Elevator Gear Case
- Remove and Install Clean Grain Loading Auger Assembly—Grain Tank Covers
- Remove and Install Clean Grain Loading Auger Assembly—Grain Tank Extensions
- Remove and Install Clean Grain Loading Auger
- Replace Clean Grain Loading Auger Bearing
- Remove and Install Lower Clean Grain Auger
- Group 30 - Grain Tank and Covers
- Specifications
- Remove and Install Grain Tank Cover—Flexible Panel
- Remove and Install Grain Tank Cover—Rigid Panel
- Remove and Install Grain Tank Cover Rockshafts
- Remove and Install Grain Tank Cover Turnbuckle
- Remove and Install Grain Tank Cover Main Link
- Adjust Grain Tank Cover (If Equipped)
- Remove and Install Grain Tank Window
- Section 140 - ENGINE GEAR CASE AND CONTROL VALVE
- Group 05 - Engine Gear Case and Valve
- Essential or Recommended Tools
- Other Material
- Specifications
- General Information
- Remove and Install Engine Gear Case
- Engine Gear Case Specifications
- Remove and Install Rotor Variable Drive
- Disassemble and Assemble Rotor Variable Drive
- Remove and Install Rotor Variable Drive Shaft
- Remove and Install Transfer Gear Case
- Disassemble and Assemble Transfer Gear Case
- Disassemble and Assemble Separator Drive Wet Clutch
- Disassemble and Assemble Hydrostatic Gear Set
- Set Hydrostatic Gearset Position
- Preload Hydrostatic Gearset Bearings
- Disassemble and Assemble Straw Chopper and Unloading Auger Drive
- Set Separator Gearset Position
- Preload Separator Gearset Bearings
- Disassemble and Assemble Separator Drive
- Preload Separator Drive Bearings
- Set Separator Drive Gear Backlash
- Disassemble and Assemble Hydrostatic Pump Drive
- Preload Hydrostatic Pump Drive Bearings
- Set Hydrostatic Pump Drive Gear Backlash
- Disassemble and Assemble Oil Screen
- Disassemble and Assemble Oil Trough
- Remove and Install Dipstick Tube—Non Threaded
- Remove and Install Dipstick Tube—Threaded
- Remove and Install Pressure Regulating Valve
- Disassemble and Assemble Pressure Regulating Valve
- Section 199 - DEALER FABRICATED TOOLS
- Group 05 - Dealer Fabricated Tools
- DFRW20—Compressor Holding Fixture
- DFHXT1—Split Ring Tool
- DFHXT2—Hydraulic Cylinder Tool
- DFHXT3—Swash Plate Holding Tool
- DFHXT4—Split Ring Tool
- DFHXT6—Park Brake Solenoid Power Lead
- DFHXT7—Tracks Mid-Roller Hub Adapter Plate
- DFHXT8—Tracks Rear Axle and Tension Axle Hub Adapter Plate
- DFT8T2—Bearing Stop Limit Driver

📚 Step-by-Step Instructions with Detailed Pictures:

No more guesswork! Our JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019) provides crystal-clear guidance, accompanied by detailed images, making every repair and service procedure a breeze.

📲 Download and Keep Forever:

Once downloaded, it is yours to keep forever! Print it out, or view it on your PC, Mac, tablet, or smartphone-whichever suits your preference!

🚙 All Models, Engines, Trims, and Transmissions Covered:

No matter your vehicle's make or model, our JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019) has you covered from A to Z. With detailed instructions for every aspect of servicing and repairs, you'll be back on the road in no time.

⚡ Instant Delivery, Guaranteed Satisfaction:

Receive your JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019) instantly via email upon payment confirmation. We stand behind our product, ensuring your satisfaction with every purchase.

💻 Compatible with All Devices:

Whether you are on a PC, Mac, tablet, or smartphone, JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019) is compatible with all platforms. Most manuals are in PDF format, and all you need is Adobe Reader, which is often pre-installed or available for free download. If the manual is in a different format, it will be specified in the title.

Don't let repair costs hold you back - empower yourself with our JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019) today!

🔧 Start Saving and Get Yours Now!

DOWNLOAD NOW JOHN DEERE S550 STS, S660 STS, S670 STS, S680 STS, S685 STS AND S690 STS COMBINE (REPAIR) SERVICE MANUAL (PN TM112019)