John Deere 700K Crawler Dozer Diagnostic Operation and Test Manual (TM13358X19)

John Deere 700K Crawler Dozer Diagnostic Operation and Test Manual (TM13358X19 04 MAR 16)

This comprehensive diagnostic and test manual is the official John Deere guide for troubleshooting, testing, and calibrating systems on the 700K Crawler Dozer. It features detailed diagnostic codes (DTCs), electrical schematics, controller calibrations, hydraulic and hydrostatic tests, and integrated grade control support.

Model Covers:

John Deere 700K Crawler Dozer

(PIN: 1T0700KX_ _F275598-)

File Format: PDF

Size: 61.51 MB

No. of pages: 1271

Language: English

Delivery Method: Instant Download – Access your file immediately after purchase.

Nota: For John Deere 700K Crawler Dozers with standard equipment (basic electrical and hydraulic systems), refer to the following manual:

👉 John Deere 700K Crawler Dozer Diagnostic Operation and Test Manual (TM12294) – provides detailed diagnostic procedures for the core systems including ECU, SDM, SSM, and VCU.

📑 Included Sections:

General Safety and Information

• Operator qualification, protective equipment, fire prevention
• Battery explosion, high-pressure fluids, welding and exhaust filter safety
• Cab guarding, worksite hazards, and emergency preparedness

Diagnostic Trouble Codes (DTCs)

• Engine Control Unit (ECU), SDM, SSM, TCU, VCU, VC2, HVC, and BCJ codes
• CAN communication errors, throttle/brake/fan/fuel/steering sensor faults
• Extensive DTC listings for calibration faults, shorts, opens, or missing signals

Operational Checkout Procedures

• Blade, electrical, lights, HVAC, horn, alternator, sensors and drive system checks
• Pre- and post-operation steps for performance verification

Engine Systems

• John Deere engine theory, system diagrams, filter cleaning, emission testing
• Idle speed adjustments, low-pressure fuel pump diagnostics

Electrical System

• Complete wiring diagrams, relay/fuse specs, controller operation
• Service ADVISOR integration, JDLink™, IGC and SmartGrade wiring
• Diagnostic test box usage and 2/3-wire sensor testing procedures

Hydraulic System

• Control valve logic, fan drive, winch, ripper, and relief valve theory
• Flow testing, accumulator discharge and precharge, valve calibration
• Diagnostics for overheating, erratic blade response, and solenoid behavior

Hydrostatic System

• Charge system theory, park brake, PDCV/PCP valve testing, flushing process
• Diagnostics for tracking errors, mistrack, speed loss, and efficiency
• Calibration validation for motors, sensors, and servo pressures

Heating and Air Conditioning

• HVAC wiring, refrigerant diagnostics, freezing, overheating, fogging prevention
• Heater core airflow, fan circuit faults, blower resistor and switch checks
• Compressor solenoid testing and refrigerant leak detection

Dealer Fabricated Tools

• Pump control pilot (PCP) test harness and other custom service tools

For complete service information, also see:

700K Crawler Dozer Repair .......... TM13359X19
JDLink (MTG) Technical Manual .......... TM114519
4000S Winches .......... CTM166
PowerTech 6068 OEM Diesel Engines (Final Tier 4/Stage IV platform) Level 33 ECU .......... CTM120019

This John Deere 700K Diagnostic and Test Manual provides a complete diagnostic platform for modern crawler systems—ideal for resolving fault codes, executing calibrations, and conducting system integrity tests across electrical, hydraulic, and hydrostatic subsystems.