JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) Service Manual (TM2187)

Looking to maintain your JOHN DEERE 5225, 5325, 5425, and 5525 TRACTORS in peak condition? Our comprehensive REPAIR SERVICE MANUAL (TM2187) is the perfect guide to tackle all your tractor maintenance and repair needs. Whether you're a professional mechanic or a DIY enthusiast, this manual provides clear, step-by-step instructions, detailed diagrams, and troubleshooting tips. From routine servicing to more complex repairs, you'll have everything you need to keep your tractors running smoothly, saving both time and money while ensuring your equipment’s longevity.

DOWNLOAD NOW JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187)

File Format: PDF

Size: 50.03 MB

No. of pages: 1078

Delivery Method: Instant Download – Access your file immediately after purchase.

📑 Table of Contents:

- General Information
- Safety
- Recognize Safety Information
- Handle Fluids Safely—Avoid Fires
- Prevent Battery Explosions
- Prepare for Emergencies
- Prevent Acid Burns
- Service and Operate Chemical Sprayers Safely
- Handle Chemical Products Safely
- Avoid High-Pressure Fluids
- Park Machine Safely
- Support Machine Properly
- Wear Protective Clothing
- Work in Clean Area
- Service Machines Safely
- Work In Ventilated Area
- Illuminate Work Area Safely
- Replace Safety Signs
- Use Proper Lifting Equipment
- Remove Paint Before Welding or Heating
- Avoid Heating Near Pressurized Fluid Lines
- Keep ROPS Installed Properly
- Service Tires Safely
- Avoid Harmful Asbestos Dust
- Practice Safe Maintenance
- Use Proper Tools
- Dispose of Waste Properly
- Prevent Machine Runaway
- Handle Starting Fluid Safely
- Service Cooling System Safely
- Stay Clear of Rotating Drivelines
- Protect Against High Pressure Spray
- Construct Dealer-Made Tools Safely
- Clean Vehicle of Hazardous Pesticides
- Live With Safety
- General Specifications
- Machine Specifications 5225 and 5325
- Machine Specifications 5425 and 5525
- SYNCSHUTTLE™ Transmission Ground Speed Estimates
- SYNCSHUTTLE™ Creeper Transmissions Ground Speed Estimates
- POWRREVERSER™ Transmission Ground Speed Estimates
- POWRREVERSER™ Creeper Transmissions Ground Speed Estimates
- Correction Factors for Other Tire Sizes
- Machine Dimensions (Straddle Mount)
- Machine Dimensions (5525 Series Hi-Crop Straddle Mount)
- Machine Dimensions (Isolated Open Operator Station)
- Machine Dimensions (Cab)
- Repair Specifications
- Service Recommendations for O-Ring Boss Fittings
- Service Recommendations for Flat Face O-Ring Seal Fittings
- Metric Cap Screw Torque Values—Grade 7
- Metric Bolt and Cap Screw Torque Values
- Unified Inch Bolt and Cap Screw Torque Values
- Abbreviations
- Fuel and Lubricants
- Diesel Fuel
- Handling and Storing Diesel Fuel
- Do Not Use Galvanized Containers
- Lubricity of Diesel Fuel
- Dieselscan Fuel Analysis
- Bio-Diesel Fuel
- Filling Fuel Tank
- Diesel Engine Break-In Oil (5425 and 5525)
- Diesel Engine Oil
- Oil Filters
- Diesel Engine Coolant
- Operating in Warm Temperature Climates
- Additional Information About Diesel Engine Coolants and Supplemental Coolant Additives
- Testing Diesel Engine Coolant
- Transmission and Hydraulic Oil
- Use Correct Transmission/Hydraulic Filter Element
- MFWD Axle Housing and Wheel Hub Oil
- Grease
- Grease (Specific Application)
- Mixing of Lubricants
- Alternative and Synthetic Lubricants
- Lubricant Storage
- Serial Number Locations
- Serial Numbers
- Product Identification Number Location
- Engine Serial Number Location—4-Cylinder
- Engine Serial Number Location—5-Cylinder
- Fuel Injection Pump Serial Number Location
- Alternator Identification Number Location
- Power Steering Valve Serial Number Location
- Starter Serial Number Location—4-Cylinder
- Starter Serial Number Location—5-Cylinder
- Transmission Serial Number Location
- Front Axle (2WD) Serial Number Location
- Mechanical Front Wheel Drive (MFWD) Serial Number Location
- Air Conditioning Compressor Serial Number Location
- Features and Accessories
- Features and Accessories
- Standard Features—Straddle Mount and Isolated Open Operator Station Tractors
- Standard Features—Cab Tractor
- Standard Features—5525 Hi-Crop Straddle Mount Tractors
- Standard Features—5225 through 5525
- Factory Installed Optional Equipment (5225—5525)
- Field Installed Optional Kits and Accessories—5225 through 5525
- Engine Repair
- Engine
- Service Equipment and Tools
- Specifications
- John Deere Engine Repair—Use CTM104 or CTM301
- Remove Engine
- Install Engine
- Cooling System
- Specifications
- Engine Coolant Pump Repair—Use CTM104 or CTM301
- Remove and Install Coolant Recovery Tank
- Remove and Inspect Radiator
- Install Radiator
- Remove and Install Thermostat—4-Cylinder Engine
- Remove and Install Thermostat—5-Cylinder Engine
- Inspect and Replace Belt Tensioner—4-Cylinder Engine
- Inspect and Replace Belt Tensioner—5-Cylinder Engine
- Fuel and Air Repair
- Fuel System
- Specifications
- Injection Pump, Nozzle and Governor Repair—Use CTM104 or CTM301
- Remove, Inspect and Install Fuel Tank—Straddle Mount
- Remove, Inspect, and Install Fuel Tank—Isolated Open Operator Station and Cab Tractors
- Replace Fuel Filter/Water Separator—4-Cylinder Engines
- Replace Fuel Filter/Water Separator—5-Cylinder Engines
- Remove and Install Fuel Filter/Primer Pump Assembly
- Air Intake System
- Turbocharger Repair—Use CTM104 or CTM301
- Specifications
- Other Material
- Remove, Inspect, and Install Air Cleaner Elements
- Remove Turbocharger—4-Cylinder Tractors
- Install Turbocharger—4-Cylinder Tractors
- Remove Turbocharger—5-Cylinder Tractors
- Install Turbocharger—5-Cylinder Tractors
- Turbocharger Break-In
- Speed Control Linkage
- Inspect and Repair Speed Control Linkage—4-Cylinder Engine—Straddle Mount
- Inspect and Repair Speed Control Linkage—5-Cylinder Engine—Straddle Mount
- Inspect and Repair Speed Control Linkage—4-Cylinder Engine—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Speed Control Linkage—5-Cylinder Engine—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Speed Control Linkage—540/1000 PTO
- Electrical Repair
- Battery, Starter and Alternator
- Starter Repair—Use CTM77
- Prevent Battery Explosions
- Remove and Install Battery
- Remove and Install Starter—5-Cylinder Engine
- Remove and Install Starter—4-Cylinder Engine
- Replace Alternator/Regulator—4-Cylinder Engine
- Replace Alternator/Regulator—5-Cylinder Engine
- Electrical System Components
- Essential Tools
- Other Material
- Specifications
- Replace Air Filter Restriction Switch
- Replace Cold Start Advance Switch
- Replace Coolant Temperature Sender—5225 and 5325 Tractors
- Replace Coolant Temperature Sender—5425 and 5525 Tractors
- Replace Engine Speed Sensor
- Replace Engine Oil Pressure Switch
- Replace Key Switch—Straddle Mount
- Replace Key Switch—Isolated Open Operator Station and Cab Tractors
- Replace Light Switch
- Replace Speakers
- Replace Antenna
- Replace Turn Signal Switch
- Replace Instrument Panel—Straddle Mount
- Replace Instrument Panel—Isolated Open Operator Station and Cab Tractors
- Program Instrument Cluster
- Replace Rear PTO Switch—Straddle Mount
- Replace Rear PTO Switch—Isolated Open Operator Station and Cab Tractors
- Replace Rear PTO Switch—Electro-Hydraulic PTO
- Replace Rockshaft Control Module—Electro-Hydraulic Hitch
- Replace Load Depth Control—Electro-Hydraulic Hitch
- Replace Neutral Start Switch—Straddle Mount—SYNCSHUTTLE™ Transmission
- Replace Neutral Start Switch—Isolated Open Operator Station and Cab Tractors—SYNCSHUTTLE™ Transmissions
- Replace Fuel Level Sender—Straddle Mount
- Replace Fuel Level Sender—Isolated Open Operator Station and Cab Tractors
- Replace Wiper Control Switch
- Replace Wiper Motor
- Replace Blower Control Switch
- Replace A/C On/Off Switch
- Replace A/C Temperature Control Switch
- Replace Blower Motor Resistor
- Replace Air Conditioning High/Low Pressure Switch
- Replace Dome Light
- Replace Door Switch
- Replace Seat Switch—Isolated Open Operator Station and Cab Tractors
- Replace Seat Switch—Straddle Mount Tractors
- Replace VEC Load Center—Isolated Open Operator Station
- Replace VEC Load Center—Cab Tractors
- Replace VEC Load Center—Straddle Mount
- Replace Electro-Hydraulic Controller—Isolated Open Operator Station and Cab Tractors
- Replace Electro-Hydraulic Controller—Straddle Mount
- Replace Start Relay
- Replace Hitch Solenoids—Isolated Open Operator Station and Cab Tractors With EH Hitch
- Replace Countershaft Speed Sensor—POWRREVERSER™ Tractors
- Replace Wheel Speed Sensor
- Replace Enable Pressure Sensor—POWRREVERSER™ Transmission
- Replace Clutch Pedal Position Sensor—POWRREVERSER™ Transmission
- Replace Clutch Disengage Switch—POWRREVERSER™ Transmission
- Replace Rear PTO Sensor—POWRREVERSER™ Transmission—With Electro-Hydraulic PTO
- Replace Hitch Draft Sensor—Electro-Hydraulic Hitch
- Replace Hitch Position Sensor—Electro-Hydraulic Hitch
- Replace Electro-Hydraulic Directional Reverser—POWRREVERSER™ Transmission
- Replace Park Switch—POWRREVERSER™ Transmission
- Replace Brake Pedal Switch—Electro-Hydraulic Tractors
- Replace Hi/Lo Shifter Switch—POWRREVERSER™ Transmission
- Replace Mid-Mount Solenoid Switch
- Replace External Raise/Lower Switch—Isolated Open Operator Station and Cab Tractors
- Replace Mid-Mount Solenoid
- Replace Clutch Enable Solenoid—POWRREVERSER™ Transmission
- Replace Trans Forward Solenoid—POWRREVERSER™ Transmission
- Replace Trans Reverse Solenoid—POWRREVERSER™ Transmission
- Replace High Solenoid—POWRREVERSER™ Transmission—With Electro-Hydraulic Hi/Lo
- Replace Rear PTO Solenoid—Electro-Hydraulic PTO
- Replace MFWD Solenoid
- Replace MFWD Switch
- Replace Seat Height Control Switch (Optional Equipment)
- Wiring Harness
- Service Equipment and Tools
- Essential Tools
- Service Parts Kits
- Replace Connector Body—Blade Terminals
- Replace WEATHER PACK™ Connector
- Install WEATHER PACK™ Contact
- Electrical Connector Repair
- METRI-PACK (Pull-Type)
- METRI-PACK (Push-Type)
- Replace Headlight Wiring Harness
- Replace Fused Power Wiring Harness
- Replace Engine Wiring Harness—5225 and 5325 Tractors
- Replace Engine Wiring Harness—5425 and 5525 Tractors
- Replace Console Wiring Harness, Isolated Open Operator Station—SYNCSHUTTLE™ Transmission
- Replace Console Wiring Harness, Isolated Open Operator Station—POWRREVERSER™ Transmission
- Replace Console Wiring Harness, Cab Tractors—SYNCSHUTTLE™ Transmission
- Replace Console Wiring Harness, Cab Tractors—POWRREVERSER™ Transmission
- Replace Rear Wiring Harness, Straddle Mount—SYNCSHUTTLE™ Transmission
- Replace Rear Wiring Harness, Straddle Mount—POWRREVERSER™ Transmission
- Replace Rear Wiring Harness, Isolated Open Operator Station—SYNCSHUTTLE™ Transmission
- Replace Rear Wiring Harness, Isolated Open Operator Station, Mechanical Hitch—POWRREVERSER™ Transmission
- Replace Rear Wiring Harness, Isolated Open Operator Station, Electro-Hydraulic Hitch—POWRREVERSER™ Transmission
- Replace Rear Wiring Harness, Cab Tractors—SYNCSHUTTLE™ Transmission
- Replace Rear Wiring Harness, Cab Tractors, Mechanical Hitch—POWRREVERSER™ Transmission
- Replace Rear Wiring Harness, Cab Tractors, Electro-Hydraulic Hitch—POWRREVERSER™ Transmission
- Replace Cab Roof Wiring Harness
- Power Train Repair
- Clutch Housing
- Service Equipment and Tools
- Other Material
- Specifications
- Separate Engine from Clutch Housing—Straddle Mount
- Install Engine to Clutch Housing—Straddle Mount
- Separate Engine from Clutch Housing—Isolated Open Operator Station and Cab Tractors
- Install Engine to Clutch Housing—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Clutch Pedal and Linkage—Straddle Mount (POWRREVERSER™ Transmissions)
- Inspect and Repair Clutch Pedal and Linkage—Isolated Open Operator Station and Cab Tractors (POWRREVERSER™ Transmissions)
- Inspect and Repair Clutch Pedal and Linkage—Straddle Mount (SYNCSHUTTLE™ Transmissions)
- Inspect and Repair Clutch Pedal and Linkage—Isolated Open Operator Station and Cab Tractors (SYNCSHUTTLE™ Transmissions)
- Clutch Assembly—SYNCSHUTTLE™ Transmissions
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove and Install Clutch Assembly
- Disassemble and Inspect Clutch Assembly
- Assemble Clutch Assembly
- Traction Clutch Finger Adjustment
- PTO Clutch Finger Adjustment
- Remove and Inspect Clutch Release Mechanism and Shafts
- Install Clutch Release Mechanism and Shafts
- Clutch Assembly—POWRREVERSER™ Transmission
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Service Parts Kits
- Remove and Install Clutch Assembly
- Disassemble and Inspect Clutch Assembly
- Assemble Clutch Assembly
- PTO Clutch Finger Adjustment
- Remove and Inspect Clutch Release Mechanism and Shafts
- Install Clutch Release Mechanism and Shafts
- Remove, Inspect, and Repair Transmission Pump
- POWRREVERSER™
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove and Install POWRREVERSER™ Control Valve
- Disassemble, Inspect, and Repair POWRREVERSER™ Control Valve
- Remove and Install EH Hi/Lo Valve
- Disassemble, Inspect, and Repair EH Hi/Lo Valve
- Remove and Install POWRREVERSER™—Transmissions Without EH Hi/Lo
- Remove and Install POWRREVERSER™—Transmissions With EH Hi/Lo
- Disassemble, Inspect, and Repair Reverse Idle Gear—Transmissions Without EH Hi/Lo
- Disassemble, Inspect, and Repair Reverse Idle Gear—Transmissions With EH Hi/Lo
- Disassemble, Inspect, and Repair Clutch Gear—Transmissions Without EH Hi/Lo
- Disassemble, Inspect, and Repair Connect Shaft—Transmissions With EH Hi/Lo
- Disassemble, Inspect, and Repair Driven Shaft—Transmissions Without EH Hi/Lo
- Disassemble, Inspect, and Repair Driven Shaft—Transmissions With EH Hi/Lo
- Disassemble, Inspect, and Repair Hi/Lo Clutch Shaft—Transmissions With EH Hi/Lo
- Disassemble, Inspect, and Repair POWRREVERSER™—Transmissions Without EH Hi/Lo
- Disassemble, Inspect, and Repair POWRREVERSER™—Transmissions With EH Hi/Lo
- SYNCSHUTTLE™ Transmission
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Separate Clutch Housing from Transmission—Straddle Mount
- Install Clutch Housing to Transmission—Straddle Mount
- Separate Clutch Housing from Transmission—Isolated Open Operator Station and Cab Tractors
- Install Clutch Housing to Transmission—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Gear and Range Shift Levers
- Remove Transmission
- Disassemble and Inspect Transmission
- Assemble Transmission
- Install Transmission
- Disassemble, Inspect and Assemble Gearshift Shaft Assemblies
- Disassemble, Inspect, and Assemble Transmission Top Shaft—SYNCSHUTTLE™ Transmission
- Disassemble, Inspect, and Assemble Range Reduction Shaft
- Disassemble, Inspect and Assemble Driven Shaft
- Remove, Inspect, and Install MFWD and Range Gears
- Remove, Inspect, and Install Reverse Idler Shaft
- Replace Clutch Housing Seal
- POWRREVERSER™ Transmission
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Separate Clutch Housing from Transmission
- Install Clutch Housing to Transmission
- Remove Transmission
- Disassemble and Inspect Transmission
- Assemble Transmission
- Install Transmission
- Disassemble, Inspect, and Assemble Gearshift Shaft Assemblies
- Disassemble, Inspect, and Assemble Transmission Bottom Shaft
- Disassemble, Inspect, and Assemble Range Reduction Shaft
- Disassemble, Inspect, and Assemble Top Shaft
- Remove, Inspect, and Install MFWD and Range Gears
- Rear PTO Drive Shaft
- Service Equipment and Tools
- Other Material
- Specifications
- Remove, Inspect and Install Rear PTO Lever and Linkage—Straddle Mount
- Remove, Inspect and Install Rear PTO Lever and Linkage—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair PTO 540/540E Shift Lever and Linkage—Straddle Mount
- Inspect and Repair PTO 540/540E Shift Lever and Linkage—Isolated Open Operator Station and Cab Tractors
- Remove and Install Standard and 540/540E Rear PTO Drive Shaft Assembly
- Disassemble, Inspect and Assemble Standard Rear PTO Drive Shaft Assembly
- Disassemble, Inspect, and Assemble Rear 540/540E PTO Drive Shaft Assembly
- Disassemble, Inspect, and Assemble Rear 540/1000 Standard PTO Drive Shaft Assembly
- Remove and Install 540/540E Electro-Hydraulic Rear PTO Shaft Assembly
- Disassemble, Inspect, and Assemble Rear 540/540E Electro-Hydraulic and 540/1000 Electro-Hydraulic Pinion Shaft
- Disassemble, Inspect, and Assemble Rear 540/540E Electro-Hydraulic PTO Output Shaft Assembly
- Disassemble, Inspect, and Assemble Rear 540/1000 Electro-Hydraulic PTO Output Shaft Assembly
- Remove, Inspect and Install Electro-Hydraulic PTO Valve
- Differential
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Service Parts Kits
- Remove and Install Differential Assembly
- Disassemble, Inspect, and Assemble Differential Assembly
- Remove and Inspect Differential Drive Shaft
- Install Differential Drive Shaft
- Remove, Inspect, and Install Differential Lock Assembly
- Differential Cone Point Adjustment
- Differential Backlash Adjustment
- Final Drives
- Service Equipment and Tools
- Other Material
- Specifications
- Remove and Install Final Drive Assembly
- Remove and Inspect Planetary Drive Assembly
- Install Planetary Drive Assembly
- Remove, Inspect, and Install Axle Shaft Assembly
- Hi-Crop Final Drives
- Other Material
- Specifications
- Remove and Install Hi-Crop Axle Assembly
- Remove, Inspect and Install Hi-Crop Final Drive Assembly
- Mechanical Front Wheel Drive
- Service Equipment and Tools
- Other Material
- Specifications
- MFWD Axle Repair—Use CTM4870
- Remove and Install MFWD Drop Gearbox
- Disassemble and Inspect MFWD Drop Gearbox
- MFWD Drop Gearbox Cross Section
- Assemble MFWD Drop Gearbox
- Remove, Inspect and Install MFWD Drive Shaft
- Remove and Install MFWD Axle Housing Assembly
- Creeper Assembly
- Other Material
- Specifications
- Remove and Install Creeper Assembly
- Disassemble, Inspect, and Assemble Creeper Assembly
- Steering and Brake Repair
- Steering Repair
- Other Material
- Specifications
- Service Parts Kits
- Remove and Install Straight Steering Column and Valve
- Remove and Install Tilt/Telescoping Steering Column
- Remove and Install Steering Valve—Tilt/Telescoping Steering Column
- Disassemble and Inspect Steering Valve
- Assemble Steering Valve
- Remove and Install Steering Cylinder—2WD Axle
- Disassemble, Inspect, and Assemble Steering Cylinder—2WD Axle
- Remove and Install Steering Cylinder—MFWD Axle
- Remove, Inspect and Install Tie Rod Assembly—2WD Axle
- Disassemble, Inspect, and Assemble Steering Cylinder—MFWD Axle—Use CTM4870
- Remove, Inspect and Install Tie Rod Assembly—MFWD Axle
- Inspect and Replace Steering Hydraulic Lines—Straddle Mount (Without Oil Cooler)
- Inspect and Replace Steering Hydraulic Lines—Straddle Mount (With Oil Cooler)
- Inspect and Replace Steering Hydraulic Lines—Isolated Open Operator Station and Cab Tractors (Without Oil Cooler)
- Inspect and Replace Steering Hydraulic Lines—Isolated Open Operator Station and Cab Tractors (With Oil Cooler)
- Brake Repair
- Service Equipment and Tools
- Other Material
- Specifications
- Remove and Install Brake Valve and Pedals
- Disassemble and Inspect Brake Pedals and Valve
- Brake Valve Cross Section
- Assemble Brake Valve
- Remove and Inspect Brakes
- Install Brakes
- Inspect and Replace Brake Hydraulic Lines
- Hydraulic Repair
- Hydraulic Pump and Filter
- Service Parts Kit
- Service Equipment and Tools
- Specifications
- Remove, Inspect, and Install Hydraulic Oil Pick-Up Screen
- Remove and Install Hydraulic Pump—5-Cylinder Engine
- Remove Hydraulic Pump External Components—5-Cylinder Engine
- Disassemble and Inspect Hydraulic Pump—5-Cylinder Engine
- Assemble Hydraulic Pump—5-Cylinder Engine
- Install Hydraulic Pump External Components—5-Cylinder Engine
- Remove and Install Hydraulic Pump—4-Cylinder Engine
- Remove Hydraulic Pump External Components—4-Cylinder Engine
- Disassemble and Inspect Hydraulic Pump—4-Cylinder Engine
- Assemble Hydraulic Pump—4-Cylinder Engine
- Install Hydraulic Pump External Components—4-Cylinder Engine
- Remove and Install Hydraulic Oil Filter/Manifold
- Inspect and Replace Hydraulic Supply/Return Lines—4-Cylinder Tractors (With SCV)
- Inspect and Replace Hydraulic Supply/Return Lines—4-Cylinder Tractors (Without SCV)
- Inspect and Replace Hydraulic Supply/Return Lines—5-Cylinder Tractors (With SCV)
- Inspect and Replace Hydraulic Supply/Return Lines—5-Cylinder Tractors (Without SCV)
- Hydraulic Oil Cooler
- Remove, Inspect, and Install Hydraulic Oil Cooler
- Rockshaft
- Service Parts Kits
- Other Material
- Specifications
- Inspect and Repair Rockshaft Control Assembly—Straddle Mount
- Inspect and Repair Rockshaft Control Assembly—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Rockshaft Control Levers and Cables—Isolated Open Operator Station and Cab Tractors
- Inspect and Repair Rockshaft Control Linkage
- Remove and Install Rockshaft Control Valve—Straddle Mount
- Remove and Install Rockshaft Control Valve—Isolated Open Operator Station and Cab Tractors With Mechanical Hitch
- Replace Main Relief Valve—All Tractors With Mechanical Hitch
- Replace Hitch Relief Valve—All Tractors With Mechanical Hitch
- Replace Load Sense Relief Valve—All Tractors With Mechanical Hitch
- Remove, Inspect, and Install Rate-of-Drop Valve—All Tractors With Mechanical Hitch
- Remove and Install Rockshaft Control Valve—All Tractors With Electro-Hydraulic Hitch
- Rockshaft Control Valve Repair—All Tractors With Electro-Hydraulic Hitch
- Rockshaft Control Valve Exploded View—All Tractors With Electro-Hydraulic Hitch
- Remove and Install Rockshaft Case—Straddle Mount
- Remove and Install Rockshaft Case—Isolated Open Operator Station and Cab Tractors With Mechanical Hitch
- Remove and Install Rockshaft Case—All Tractors With Electro-Hydraulic Hitch
- Remove, Inspect, and Install Rockshaft Lift Arms
- Remove, Inspect, and Install Rockshaft Piston and Cylinder
- Inspect and Repair Draft Sensing Support Assembly
- Selective Control Valve
- Service Parts Kits—Triple SCVs
- Service Parts Kits—Dual SCVs
- Other Material
- Specifications
- Inspect and Repair SCV Levers and Linkage—Straddle Mount
- Inspect and Repair SCV Levers and Linkage—Isolated Open Operator Station and Cab Tractors
- Remove and Install Dual or Triple Selective Control Valve (SCV)
- Disassemble, Inspect, and Assemble Dual Selective Control Valve (SCV)
- Triple Selective Control Valve (SCV) Cross-Sectional View
- Disassemble, Inspect, and Assemble Triple Selective Control Valve (SCV)
- Inspect and Replace Hydraulic Lines Single, Dual, or Triple Selective Control Valve (SCV)
- Inspect and Replace Hydraulic Lines Single, Dual, or Triple Selective Control Valve (SCV) With Mid-Mount Valve
- Hydraulic Mid-Mount Control Valve
- Service Parts Kits
- Other Material
- Specifications
- Inspect and Repair Joystick and Linkage
- Remove and Install Mid-Mount Control Valve
- Disassemble, Inspect, and Assemble Dual Mid-Mount Control Valve
- Disassemble, Inspect, and Assemble Triple Mid-Mount Control Valve
- Inspect and Replace Hydraulic Lines on Dual or Triple Mid-Mount Control Valve
- Inspect and Replace Hydraulic Lines on Dual or Triple Mid-Mount Control Valve With Rear SCV
- Miscellaneous Repair
- Front Axle—2WD
- Service Equipment and Tools
- Specifications
- Remove and Install Front Axle—2WD
- Inspect and Replace Pivot Pin and Bushings—2WD Axle
- Remove and Install Spindle Assembly—2WD Axle
- Inspect and Replace Spindle Shaft Bushings—2WD Axle
- Wheels
- Specifications
- Inspect and Replace Front Wheel Bearings
- 3-Point Hitch
- Specifications
- Inspect and Repair Fixed Draft Links
- Inspect and Repair Telescoping Draft Links
- Inspect and Repair Standard Lift Link
- Inspect and Repair Adjustable Lift Link
- Inspect and Repair Center Link
- Remove and Install Draw Bar and Support
- Fenders
- Other Material
- Specifications
- Remove and Install Fenders—Straddle Mount
- Remove and Install Fenders—Isolated Open Operator Station Tractors
- Remove and Install Fenders—Cab Tractors
- Hood
- Remove and Install Hood
- Operator Station Repair
- Seat and Support
- Specifications
- Remove and Install Seat and Support—Straddle Mount
- Remove and Install Seat and Support—Isolated Open Operator Station and Cab Tractors
- Remove and Install Seat and Support—Cab Tractors With Air Seat
- Control Console and Panel
- Remove and Install Right-Side Control Console—Straddle Mount
- Remove and Install Left-Side Control Console—Straddle Mount
- Remove and Install Right-Side Control Console—Isolated Open Operator Station Tractors
- Remove and Install Left-Side Control Console—Isolated Open Operator Station Tractors
- Remove and Install Right-Side Control Console—Cab Tractors
- Remove and Install Left-Side Control Console—Cab Tractors
- Remove and Install Cowl Cover
- ROLL-GARD™
- Specifications
- Remove and Install ROLL-GARD™—Straddle Mount
- Remove and Install ROLL-GARD™—Isolated Open Operator Station
- Cab Components
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Remove, Inspect, and Install Cab Interior Recirculating Air Filters
- Remove, Inspect, and Install Exterior Cab Intake Air Filter
- Remove and Install Headliner
- Remove and Install Left-Side Upholstery
- Remove and Install Right-Side Upholstery
- Remove and Install Windshield
- Remove and Install Front Lower Windows
- Remove and Install Rear Lower Window
- Remove and Install Rear Upper Window
- Remove and Install Side Windows
- Remove and Install Cab Doors
- Remove and Install Cab Outer Roof
- Remove and Install A/C Housing Inner Roof
- Remove Cab
- Install Cab
- Isolated Open Operator Station Components
- Other Material
- Specifications
- Remove Isolated Open Operator Station
- Install Isolated Open Operator Station
- Air Conditioning System
- Essential Tools
- Service Equipment and Tools
- Other Material
- Specifications
- Service Parts Kits
- Recover/Recycle Air Conditioning Refrigerant
- Replace Air Conditioning Receiver/Dryer
- Remove, Inspect, and Install Air Conditioning Condenser
- Remove, Inspect, and Install Air Conditioning Compressor
- Test Volumetric Efficiency of Compressor
- Test Compressor Shaft Seal Leakage
- Disassemble and Assemble Compressor Clutch
- Disassemble, Inspect, and Assemble Compressor
- Check Compressor Clutch Hub Clearance
- Inspect Compressor Manifold
- Remove and Install Compressor Relief Valve
- Remove and Install HVAC Housing Cover
- Remove Blower Motors
- Remove Evaporator/Heater Core
- Leak Test Evaporator/Heater Core
- Install Evaporator/Heater Core
- Service Expansion Valve
- Expansion Valve Bench Test
- Refrigerant Oil Information
- Check Compressor Oil Charge
- Determine Correct Refrigerant Oil Charge
- Add Refrigerant Oil to System
- System Information
- Flush Air Conditioning System
- Evacuate Air Conditioning System
- Charge Air Conditioning System
- Heating System
- Replace Heater Temperature Control Cable
- Remove Heater Control Valve
- Leak Test Heater Control Valve
- Install Heater Control Valve
- Dealer Fabricated Tools
- Dealer Fabricated Tools
- DFLV1A—Final Drive Turning Tool
- DFRW20—Compressor Holding Fixture
- DFRW83—Nozzle Assembly
- DFT1162—Snap Ring Removal Tool
- Page Numbers
- SECTION 10—General Information
- Group 05 Safety
- Group 10 General Specifications
- Group 20 Fuel and Lubricants
- Group 25 Serial Number Locations
- Group 30 Features and Accessories
- SECTION 20—Engine Repair
- Group 05 Engine
- Group 10 Cooling System
- SECTION 30—Fuel and Air Repair
- Group 05 Fuel System
- Group 10 Air Intake System
- Group 15 Speed Control Linkage
- SECTION 40—Electrical Repair
- Group 05 Battery, Starter and Alternator
- Group 10 Electrical System Components
- Group 15 Wiring Harness
- SECTION 50—Power Train Repair
- Group 05 Clutch Housing
- Group 10 Clutch Assembly—SYNCSHUTTLE Transmissions
- Group 11 Clutch Assembly—POWRREVERSER Transmission
- Group 12 POWRREVERSER
- Group 15 SYNCSHUTTLE Transmission
- Group 16 POWRREVERSER Transmission
- Group 20 Rear PTO Drive Shaft
- Group 25 Differential
- Group 30 Final Drives
- Group 31 Hi-Crop Final Drives
- Group 35 Mechanical Front Wheel Drive
- Group 40 Creeper Assembly
- SECTION 60—Steering and Brake Repair
- Group 05 Steering Repair
- Group 10 Brake Repair
- SECTION 70—Hydraulic Repair
- Group 05 Hydraulic Pump and Filter
- Group 06 Hydraulic Oil Cooler
- Group 10 Rockshaft
- Group 15 Selective Control Valve
- Group 20 Hydraulic Mid-Mount Control Valve
- SECTION 80—Miscellaneous Repair
- Group 05 Front Axle—2WD
- Group 10 Wheels
- Group 15 3-Point Hitch
- Group 20 Fenders
- Group 25 Hood
- SECTION 90—Operator Station Repair
- Group 05 Seat and Support
- Group 06 Control Console and Panel
- Group 10 ROLL-GARD
- Group 15 Cab Components
- Group 16 Isolated Open Operator Station Components
- Group 20 Air Conditioning System
- Group 25 Heating System
- SECTION 99—Dealer Fabricated Tools
- Group 05 Dealer Fabricated Tools

📚 Step-by-Step Instructions with Detailed Pictures:

No more guesswork! Our JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187) provides crystal-clear guidance, accompanied by detailed images, making every repair and service procedure a breeze.

📲 Download and Keep Forever:

Once downloaded, it is yours to keep forever! Print it out, or view it on your PC, Mac, tablet, or smartphone-whichever suits your preference!

🚙 All Models, Engines, Trims, and Transmissions Covered:

No matter your vehicle's make or model, our JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187) has you covered from A to Z. With detailed instructions for every aspect of servicing and repairs, you'll be back on the road in no time.

⚡ Instant Delivery, Guaranteed Satisfaction:

Receive your JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187) instantly via email upon payment confirmation. We stand behind our product, ensuring your satisfaction with every purchase.

💻 Compatible with All Devices:

Whether you are on a PC, Mac, tablet, or smartphone, JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187) is compatible with all platforms. Most manuals are in PDF format, and all you need is Adobe Reader, which is often pre-installed or available for free download. If the manual is in a different format, it will be specified in the title.

Don't let repair costs hold you back - empower yourself with our JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187) today!

🔧 Start Saving and Get Yours Now!

DOWNLOAD NOW JOHN DEERE 5225, 5325, 5425, AND 5525 TRACTORS (REPAIR) SERVICE MANUAL (PN TM2187)