JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) TM901619

The JOHN DEERE 5045E, 5055E, 5065E, and 5075E (FT4) TRACTOR NA DIAGNOSTIC, OPERATION AND TEST MANUAL (TM901619) is your go-to guide for troubleshooting, diagnostics, and testing. It offers detailed instructions to help you understand and maintain these powerful tractor models. Whether you're performing routine checks or diagnosing complex issues, this manual provides the technical knowledge and step-by-step guidance to keep your tractor running smoothly.

DOWNLOAD NOW JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619)

File Format: PDF

Size: 32.25 MB

No. of pages: 991

Delivery Method: Instant Download – Access your file immediately after purchase.

📑 Table of Contents:

- FOREWORD
- Section 210 - GENERAL
- Group 05 - Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Prepare for Emergencies
- Wear Protective Clothing
- Protect Against Noise
- Handle Fluids Safely—Avoid Fires
- Handle Starting Fluid Safely
- Fire Prevention
- Keep ROPS Installed Properly
- Use Foldable ROPS and Seat Belt Properly
- Stay Clear of Rotating Drivelines
- Use Steps and Handholds Correctly
- Read Operator Manuals for ISOBUS Implements
- Use Seat Belt Properly
- Operating the Tractor Safely
- Avoid Backover Accidents
- Limited Use in Forestry Operation
- Operating the Loader Tractor Safely
- Keep Riders Off Machine
- Instructional Seat
- Use Safety Lights and Devices
- Use a Safety Chain
- Transport Towed Equipment at Safe Speeds
- Use Caution On Slopes and Uneven Terrain
- Freeing a Mired Machine
- Avoid Contact with Agricultural Chemicals
- Handle Agricultural Chemicals Safely
- Handling Batteries Safely
- Avoid Heating Near Pressurized Fluid Lines
- Remove Paint Before Welding or Heating
- Handle Electronic Components and Brackets Safely
- Practice Safe Maintenance
- Avoid Hot Exhaust
- Clean Exhaust Filter Safely
- Work In Ventilated Area
- Support Machine Properly
- Prevent Machine Runaway
- Park Machine Safely
- Transport Tractor Safely
- Service Cooling System Safely
- Service Accumulator Systems Safely
- Service Tires Safely
- Service Front-Wheel Drive Tractor Safely
- Tightening Wheel Retaining Bolts/Nuts
- Avoid High-Pressure Fluids
- Do Not Open High-Pressure Fuel System
- Store Attachments Safely
- Dispose of Waste Properly
- Group 10 - General Specifications
- General Specifications
- General Reference List
- Group 15 - General References
- Metric Bolt and Cap Screw Torque Values
- Unified Inch Bolt and Cap Screw Torque Values
- Glossary of Terms
- JIC Hydraulic Symbols
- Wiring Diagram and Schematic Information
- Electrical Schematic Symbols
- Reading Wiring Schematics and Diagrams
- Visually Inspect Electrical System
- Seven-Step Electrical Procedure
- Using a Probe Light
- Circuit Types
- Circuit Malfunctions
- Troubleshooting Circuit Malfunctions
- Understanding Electrical vs. Electronic Circuits
- Intermittent Electronic Problems
- Relay Circuit Types
- Using a Digital Multimeter
- Troubleshooting Unresolved Problems
- Section 211 - DIAGNOSTIC TROUBLE CODES
- Group CCU - CCU Code Diagnostics
- CCU - Non-Tractor CCU Codes
- CCU 000096.03 - Fuel Level Sensor Circuit Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 000237.02 - VIN Security Data Conflict
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 000237.31 - VIN Security Messages Missing
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 000569.05 - Rear Differential Lock Solenoid Circuit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 000628.02 - CCU EOL Data Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 000630.14 - Rear PTO Configuration Invalid
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 001638.00 - Hydraulic Oil Temperature Very Hot
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- CCU 001638.03 - Hydraulic Oil Temperature Sensor Circuit Voltage High
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- CCU 001638.04 - Hydraulic Oil Temperature Sensor Circuit Voltage Low
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Verify Codes
- Code Operational Checks
- System Checks
- Electrical Circuit Checks
- Additional Checks and Intermittent Failure Evaluation
- CCU 001638.16 - Hydraulic Oil Temperature High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 001883.00 - Rear PTO Overspeed
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 001883.01 - Rear PTO Underspeed
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 002818.31 - Operator Presence Switch Not Activated
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 003509.03 - Sensor Supply Voltage Out of Range High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 003509.04 - Sensor Supply Voltage Out of Range Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 523316.04 - CCU Switched Supply Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 523839.02 - Secondary Brake Switch Conflict
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 523844.12 - Differential Lock Braking Disabled
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 524037.02 - MFWD Switch Circuit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 524224.14 - PTO Switch Voltage Mismatch
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 524235.05 - MFWD Solenoid Circuit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 524252.05 - Rear PTO Solenoid Circuit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 524255.31 - Rear Remote PTO Enabled
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- CCU 600006.31 - Default DTC
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- Group ECU - ECU Code Diagnostics
- ECU - Non-Tractor ECU Codes
- Group EIC - EIC Code Diagnostics
- EIC 000628.02 - EIC EOL Data Fault
- Verify code
- Verify code
- EIC 000628.12 - EIC Programming Fault
- EIC 000630.13 - EIC Calibration Fault-Not Calibrated
- Verify code
- Verify code
- EIC 001237.31 - Failed Key Authentication
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 002000.09 - ECU Message Missing
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- EIC 002007.09 - RPT Message Missing
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 002029.09 - Immobilizer Message Missing
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 002029.12 - EIC Control Unit Fault
- Verify code
- Verify code
- EIC 002034.09 - SCC Message Missing
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 002140.09 - AIC Message Missing
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 003695.14 - Diesel Particulate Filter Regeneration Fault
- Operational Check
- System Checks
- Operational Check
- System Checks
- EIC 3719.15 - Diesel Particulate Filter Regeneration Fault
- Operational Check
- System Checks
- Operational Check
- System Checks
- EIC 521192.12 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521192.13 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521214.11 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521214.31 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521321.09 - Immobilizer Message Missing
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521321.12 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521322.07 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 521322.31 - Immobilizer Control Device Fault
- Verify Code
- Electrical Circuit Checks
- Verify Code
- Electrical Circuit Checks
- EIC 523702.14 - EIC Control Unit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- EIC 523702.31 - EIC Control Unit Fault
- Verify code
- Verify code
- Group ICC - ICC Code Diagnostics
- ICC - Non-Tractor ICC Codes
- ICC 000237.02 - ICC VIN Security Mismatch
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- ICC 000237.31 - ICC VIN Security Missing
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- ICC 000628.12 - ICC Programming Fault
- ICC 000630.02 - ICC Calibration Memory Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- ICC 002818.31 - Operator Presence Switch Not Activated
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- ICC 003695.02 - Regeneration Switch Malfunction
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- ICC 003696.02 - Regeneration Switch Malfunction
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- Group PTR - PTR Code Diagnostics
- PTR 000084.07 - Excessive Wheel Speed Detected During Calibration
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000158.01 - System Switched Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000162.02 - High-Low Switch Circuit Conflict
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000162.31 - High, Low Switch Stuck On
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000190.18 - Engine Speed Missing During Shift
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000191.17 - Top Shaft Speed Too Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000598.02 - Clutch Switch Open With Pedal Up
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000598.04 - Clutch Switch Signal Failed Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000628.02 - EOL Check Sum Error
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000630.14 - Tractor Model Out Of Range-Transmission Calibration Value High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000752.03 - Power Shuttle Potentiometer Input Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 000752.04 - Power Shuttle Potentiometer Input Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 001504.10 - Seat Switch Closed Too Long
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 002820.31 - Operator Not Present During Shift
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 002825.07 - Not Valid Neutral Park Command
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 003509.03 - PTR Sensor Supply Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 003509.04 - PTR Sensor Supply Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 521233.05 - High Valve Driver Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 521234.05 - Low Valve Driver Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 521235.05 - Reverse Valve Driver Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 522456.07 - Speed Control Lever Park and Neutral Switch Conflict
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 522456.31 - Speed Control Lever Transition Without Using Clutch Pedal
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 523953.02 - Speed Control Lever Sensor Circuit Conflict
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 523959.31 - No Wheel Speed While in Gear
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524020.31 - Reverser in Gear at Power-Up
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524021.31 - Directional Reverser Lever Switch Circuit Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524160.02 - Not Valid Neutral-Not Neutral Switch
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.02 - Clutch Pedal Compare Error
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.14 - Sync Lever Shift Without Clutch Pedal Engaged
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.15 - Clutch Pedal Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.16 - Both Clutch Pedals Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.17 - Clutch Pedal Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524173.18 - Both Clutch Pedals Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524230.05 - Enable Valve Driver Fault
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524230.07 - Enable Valve Stuck
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524234.03 - Pressure Sensor Voltage High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524234.04 - Pressure Sensor Voltage Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524254.03 - Transmission Enable Valve Power High
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524254.04 - Transmission Enable Valve Power Low
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- PTR 524267.15 - High Speed Shuttle Shift
- Operational Check
- Verify Code
- Operational Check
- Verify Code
- Section 212 - OBSERVABLE SYMPTOMS
- Group 20 - Engines
- Engine Problems
- Group 30 - Fuel and Air
- Fuel and Air Problems
- Group 40 - Electrical
- 12-Volt Electrical Problems
- Connector Problems
- Group 45 - Control Units
- Electronic Problems
- Group 55 - PowrReverser™ Transmissions
- PowrReverser™ Transmission Problems
- Group 56 - Drive Systems
- Drive System Problems
- Group 60 - Steering and Brakes
- Steering and Brake System Problems
- Group 70 - Hydraulics
- Hitch Problems
- Selective Control Valve Problems
- Group 90 - Operator Station
- Air Conditioning Problems
- Section 213 - SYSTEM DIAGNOSIS
- Group 40 - Starting, Charging and Start Aid
- System Diagnosis
- Perform Preliminary Checks
- Perform Operational Checks
- Perform Starting Circuit Test
- Perform Charging System Test
- Perform Fuel Transfer Pump Circuit Test
- Perform Preliminary Checks
- Perform Operational Checks
- Perform Starting Circuit Test
- Perform Charging System Test
- Perform Fuel Transfer Pump Circuit Test
- Group 55 - PowrReverser™ Transmission
- Before You Start
- Preliminary Checks
- Operational Checks
- Perform Transmission Pump Pressure Test
- Perform PowrReverserPowrReverser is a trademark of Deere & Company Control Valve Tests
- Preliminary Checks
- Operational Checks
- Perform Transmission Pump Pressure Test
- Perform PowrReverserPowrReverser is a trademark of Deere & Company Control Valve Tests
- Group 56A - Differential Lock
- Before You Start
- Preliminary Checks
- Perform Differential Lock Operational Checks
- Preliminary Checks
- Perform Differential Lock Operational Checks
- Group 56B - MFWD
- Before You Start
- Perform Preliminary Checks
- Perform MFWD Operational Checks
- Perform Preliminary Checks
- Perform MFWD Operational Checks
- Group 56C - PTO
- Before You Start
- Perform PTO Preliminary Checks
- Perform PTO Operational Check
- Perform PTO Adjustment
- Perform PTO Preliminary Checks
- Perform PTO Operational Check
- Perform PTO Adjustment
- Before You Start
- PTO Preliminary Checks
- PTO Operational Check
- Transmission System Pressure Check
- PTO Clutch Leak Check
- PTO Preliminary Checks
- PTO Operational Check
- Transmission System Pressure Check
- PTO Clutch Leak Check
- Group 60A - Steering
- Before You Start
- Perform Steering Preliminary Check
- Perform Steering Operational Check
- Perform Steering Pump Flow Test
- Perform Steering Valve Relief Test
- Perform Steering Leak Test
- Perform Steering Preliminary Check
- Perform Steering Operational Check
- Perform Steering Pump Flow Test
- Perform Steering Valve Relief Test
- Perform Steering Leak Test
- Group 60B - Rear Brakes
- Before You Start
- Perform Rear Brakes Preliminary Check
- Perform Rear Brakes Operational Checks
- Perform Bleed Rear Brakes
- Perform Rear Brake Valve Leakage Test
- Perform Rear Brakes Preliminary Check
- Perform Rear Brakes Operational Checks
- Perform Bleed Rear Brakes
- Perform Rear Brake Valve Leakage Test
- Group 70A - Rear SCV System Diagnosis
- Before You Start
- Operational Check
- Perform Pump Flow Test
- Perform Main Relief Valve Test
- Perform SCV Leakage Test
- Same Flow Direction
- Operational Check
- Perform Pump Flow Test
- Perform Main Relief Valve Test
- Perform SCV Leakage Test
- Same Flow Direction
- Group 70B - Mid-Mount Control Valve System Diagnosis
- Before You Start
- Operational Check
- Perform Pump Flow Test
- Perform Main Relief Valve Test
- Perform SCV Leakage Test
- Same Flow Direction
- Operational Check
- Perform Pump Flow Test
- Perform Main Relief Valve Test
- Perform SCV Leakage Test
- Same Flow Direction
- Group 70C - Rear Hitch System Diagnosis
- Before You Start
- Preliminary Checks
- Perform Rockshaft Lift Cycle Test
- Perform Rear Hitch Operational Check
- Perform Rockshaft Position-Sensing Feedback Linkage Adjustment
- Perform Rockshaft Draft-Sensing Feedback Linkage Adjustment
- Perform Pump Flow Test
- Inspect Valve
- Inspect Rockshaft Cylinder
- Perform Rockshaft Leakage Test
- Preliminary Checks
- Perform Rockshaft Lift Cycle Test
- Perform Rear Hitch Operational Check
- Perform Rockshaft Position-Sensing Feedback Linkage Adjustment
- Perform Rockshaft Draft-Sensing Feedback Linkage Adjustment
- Perform Pump Flow Test
- Inspect Valve
- Inspect Rockshaft Cylinder
- Perform Rockshaft Leakage Test
- Group 90 - Air Conditioning
- Before You Start
- Preliminary Checks
- Operational Checks
- Blower Motor Test
- Install Test Equipment
- Compressor Clutch Engagement and Cycle Test
- A/C System Pressure Test
- Temperature Drop Test
- Summary of Air Conditioning Testing
- Preliminary Checks
- Operational Checks
- Blower Motor Test
- Install Test Equipment
- Compressor Clutch Engagement and Cycle Test
- A/C System Pressure Test
- Temperature Drop Test
- Summary of Air Conditioning Testing
- Section 220 - ENGINES
- Group 05 - General Information
- John Deere Engine Repair—Use Component Technical Manual
- General Engine Specifications
- List of All Tractor-Specific Engine Information
- Group 15 - Tests and Adjustments
- Adjust Hand Throttle Friction
- Group 20 - Engine System Theory of Operation
- Overview of 5045E,5055E , 5065E , and 5075E Tractor Engines
- Section 230 - FUEL AND AIR
- Group 05 - General Information
- John Deere Engine Fuel Systems Repair—Use Component Technical Manual
- Group 20 - Fuel and Air Theory of Operation
- Fuel System Operation
- Air Intake System Operation
- Section 240 - ELECTRICAL SYSTEM
- Group 15A - Tests and Adjustments (Cab)
- Starting Circuit Test for PR (Cab)
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Start Relay (K13)
- Starter Relay (K18) Circuit Check
- Starter (M01) Circuit Test
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Start Relay (K13)
- Starter Relay (K18) Circuit Check
- Starter (M01) Circuit Test
- Starting Circuit Test for TSS (Cab)
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Switch (S03) Circuit Checks
- Rear PTO Switch (S19) Circuit Checks
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Switch (S03) Circuit Checks
- Rear PTO Switch (S19) Circuit Checks
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Battery Inspection Test
- Visual Battery Check
- Check Electrolyte Level of All Cells
- Check Specific Gravity of Each Cell
- Check Battery Voltage
- Charge Battery
- Select Charging Rate
- Charge Battery (Continued)
- Check Battery Condition
- Visual Battery Check
- Check Electrolyte Level of All Cells
- Check Specific Gravity of Each Cell
- Check Battery Voltage
- Charge Battery
- Select Charging Rate
- Charge Battery (Continued)
- Check Battery Condition
- Charging System Test
- Alternator Output Test
- Alternator Output Test
- Warning Lights Circuit Test (Cab)
- Fuse Circuit Check
- Operational Check
- VEC Light Switch Power Check
- Circuit 0010 Check
- Light Switch (S21) Circuit Check
- Instrument Cluster Circuit Check
- Turn/Hazard Relay (K15) Check
- Turn/Hazard Relay (K15) Circuit Check
- Left Turn Relay (K16) Check
- Left Turn Relay (K16) Circuit Check
- Right Turn Relay (K17) Check
- Right Turn Relay (K17) Circuit Check
- Fuse Circuit Check
- Operational Check
- VEC Light Switch Power Check
- Circuit 0010 Check
- Light Switch (S21) Circuit Check
- Instrument Cluster Circuit Check
- Turn/Hazard Relay (K15) Check
- Turn/Hazard Relay (K15) Circuit Check
- Left Turn Relay (K16) Check
- Left Turn Relay (K16) Circuit Check
- Right Turn Relay (K17) Check
- Right Turn Relay (K17) Circuit Check
- Turn Signal Lights Circuit Test (Cab)
- Fuse Circuit Check
- Circuit 0072 Check
- Fuse F43 Circuit Check
- Turn Signal Light Switch Circuit Check
- Fuse F52 Circuit Check
- Left Turn Relay (K16) Check
- Left Turn Relay (K16) Circuit Check
- Right Turn Relay (K17) Check
- Right Turn Relay (K17) Circuit Check
- Turn Signal Power Circuit Check
- Left Flash Relay (K18) Check
- Right Flash Relay (K19) Check
- Fuse Circuit Check
- Circuit 0072 Check
- Fuse F43 Circuit Check
- Turn Signal Light Switch Circuit Check
- Fuse F52 Circuit Check
- Left Turn Relay (K16) Check
- Left Turn Relay (K16) Circuit Check
- Right Turn Relay (K17) Check
- Right Turn Relay (K17) Circuit Check
- Turn Signal Power Circuit Check
- Left Flash Relay (K18) Check
- Right Flash Relay (K19) Check
- Brake Lights Circuit Test (Cab)
- Fuse Circuit Check
- Operational Check
- Circuit 1512 Check
- Brake Switch Test
- Circuit 1136 Check
- Circuit 0010 Check
- Fuse Circuit Check
- Operational Check
- Circuit 1512 Check
- Brake Switch Test
- Circuit 1136 Check
- Circuit 0010 Check
- Accessory Power and Junction Block Circuit Test (Cab)
- Fuse F25 (PR) / F26 (TSS) Circuit Check
- Fuse F31 Circuit Check
- Fuse F33 Circuit Check
- Fuse F32 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- Accessory Relay (K14) Check
- Accessory Relay (K14) Circuit Check
- Circuit 0010 Check
- Trailer Power Relay (K25) Check
- Trailer Power Relay (K25) Circuit Check
- Junction Block (X03) Circuit Check
- Fuse F25 (PR) / F26 (TSS) Circuit Check
- Fuse F31 Circuit Check
- Fuse F33 Circuit Check
- Fuse F32 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- Accessory Relay (K14) Check
- Accessory Relay (K14) Circuit Check
- Circuit 0010 Check
- Trailer Power Relay (K25) Check
- Trailer Power Relay (K25) Circuit Check
- Junction Block (X03) Circuit Check
- Engine Speed Sensor Circuit Test
- Power Check
- Fuse F1 Circuit Check
- Key Switch (S1) Circuit Check
- Fuse F19 Circuit Check
- Fuse F8 Circuit Check
- Engine Speed Sensor Circuit Check
- Circuit 5305 Check
- Power Check
- Fuse F1 Circuit Check
- Key Switch (S1) Circuit Check
- Fuse F19 Circuit Check
- Fuse F8 Circuit Check
- Engine Speed Sensor Circuit Check
- Circuit 5305 Check
- Engine Oil Pressure Sensor Circuit Test (Cab)
- Power Check
- Fuse F25(PR) / F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Engine Oil Pressure Sensor Check
- Circuit 5634 Check
- Circuit 5647 Check
- Power Check
- Fuse F25(PR) / F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Engine Oil Pressure Sensor Check
- Circuit 5634 Check
- Circuit 5647 Check
- Air Filter Restriction Switch Circuit Test (Cab)
- Air Filter Restriction Switch Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Air Filter Restriction Switch Circuit Check
- Air Filter Restriction Switch Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Air Filter Restriction Switch Circuit Check
- Fuel Level Sender Circuit Test (Cab)
- Fuel Level Sender Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F43 Circuit Check
- Fuse F20 Circuit Check
- Fuel Level Sender Circuit Check
- Fuel Level Sender Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F43 Circuit Check
- Fuse F20 Circuit Check
- Fuel Level Sender Circuit Check
- Engine Coolant Temperature Sensor Circuit Test (Cab)
- Engine Coolant Temperature Sensor Circuit Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F22 Circuit Check
- Fuse F20 Circuit Check
- Engine Coolant Temperature Sensor Circuit Check
- Circuit 5461 Check
- Circuit 5643 Check
- Engine Coolant Temperature Sensor Circuit Check
- Power Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F22 Circuit Check
- Fuse F20 Circuit Check
- Engine Coolant Temperature Sensor Circuit Check
- Circuit 5461 Check
- Circuit 5643 Check
- Tail Light Circuit Test (Cab)
- Fuse F45 Circuit Check
- Light Switch (S21) Circuit Check
- Diode Block (V01) Circuit Check
- Tail/Clearance License Relay (K35) Check
- Fuse F27 Circuit Check
- Fuse F40 Circuit Check
- Left Tail/Brake/Turn Light (E32) Circuit Check
- Right Tail/Turn Light (E31) Circuit Check
- Fuse F45 Circuit Check
- Light Switch (S21) Circuit Check
- Diode Block (V01) Circuit Check
- Tail/Clearance License Relay (K35) Check
- Fuse F27 Circuit Check
- Fuse F40 Circuit Check
- Left Tail/Brake/Turn Light (E32) Circuit Check
- Right Tail/Turn Light (E31) Circuit Check
- Front Work Light Circuit Test (Cab)
- Fuse F45 Circuit Check
- Fuse F30 Circuit Check
- Light Switch (S21) Circuit Check
- Circuit 1107 Check
- Front Work Lights Relay (K24) Check
- Front Work Lights Relay (K24) Circuit Check
- Left Front Work Light (E40) Circuit Check
- Right Front Work Light (E39) Circuit Check
- Fuse F45 Circuit Check
- Fuse F30 Circuit Check
- Light Switch (S21) Circuit Check
- Circuit 1107 Check
- Front Work Lights Relay (K24) Check
- Front Work Lights Relay (K24) Circuit Check
- Left Front Work Light (E40) Circuit Check
- Right Front Work Light (E39) Circuit Check
- Beacon Light Circuit Test (Cab)
- Fuse F30 Circuit Check
- Beacon Light Switch (S26) Circuit Check
- Beacon Light (H41) Circuit Check
- Fuse F30 Circuit Check
- Beacon Light Switch (S26) Circuit Check
- Beacon Light (H41) Circuit Check
- Rear Work Light Circuit Test (Cab)
- Fuse F45 Circuit Check
- Fuse F29 Circuit Check
- Circuit 1107 Check
- Light Switch (S21) Circuit Check
- Rear Work Lights Relay (K23) Check
- Rear Work Lights Relay (K23) Circuit Check
- Left Rear Work Light (E38) Circuit Check
- Right Rear Work Light (E37) Circuit Check
- Fuse F45 Circuit Check
- Fuse F29 Circuit Check
- Circuit 1107 Check
- Light Switch (S21) Circuit Check
- Rear Work Lights Relay (K23) Check
- Rear Work Lights Relay (K23) Circuit Check
- Left Rear Work Light (E38) Circuit Check
- Right Rear Work Light (E37) Circuit Check
- Headlight and Backlighting Circuit Test (Cab)
- Fuse F45 Circuit Check
- Fuse F20 Circuit Check
- Light Switch (S21) Circuit Check
- Diode Block (V01) Circuit Check
- Fuse F28 Circuit Check
- Hi/Low Head Light Relay (K32) Check
- Hi/Low Head Beam Switch (S36) Check
- Left Headlight (E07) Circuit Check
- Right Headlight (E06) Circuit Check
- Instrument Cluster (A1) Check
- Fuse F45 Circuit Check
- Fuse F20 Circuit Check
- Light Switch (S21) Circuit Check
- Diode Block (V01) Circuit Check
- Fuse F28 Circuit Check
- Hi/Low Head Light Relay (K32) Check
- Hi/Low Head Beam Switch (S36) Check
- Left Headlight (E07) Circuit Check
- Right Headlight (E06) Circuit Check
- Instrument Cluster (A1) Check
- Radio and Dome Light Circuit Test
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F38 Circuit Check
- Fuse F39 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- Accessory Relay (K14) Check
- Accessory Relay (K14) Circuit Check
- Circuit 0010 Check
- Dome Light (A04) Circuit Check
- Left Door Switch (S31) Circuit Check
- Radio Power Circuit Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F38 Circuit Check
- Fuse F39 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- Accessory Relay (K14) Check
- Accessory Relay (K14) Circuit Check
- Circuit 0010 Check
- Dome Light (A04) Circuit Check
- Left Door Switch (S31) Circuit Check
- Radio Power Circuit Check
- HVAC Circuit Test
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F35 Circuit Check
- Fuse F36 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- HVAC Relay (K26) Check
- HVAC Relay (K26) Circuit Check
- Blower Switch (S27) Circuit Check
- Blower Motor Resistors (R01) Circuit Check
- Right Blower Relay (K28) Check
- Right Blower Relay (K28) Circuit Check
- Left Blower Relay (K27) Check
- Left Blower Relay (K27) Circuit Check
- Left Blower Motor (M02) Circuit Check
- Right Blower Motor (M03) Circuit Check
- A/C On/Off Switch (S28) Circuit Check
- A/C Deicing Switch (B07) Circuit Check
- A/C High/Low Pressure Switch (B08) Circuit Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F35 Circuit Check
- Fuse F36 Circuit Check
- Key Switch (S01) Circuit Check
- Circuit 5212 Check
- HVAC Relay (K26) Check
- HVAC Relay (K26) Circuit Check
- Blower Switch (S27) Circuit Check
- Blower Motor Resistors (R01) Circuit Check
- Right Blower Relay (K28) Check
- Right Blower Relay (K28) Circuit Check
- Left Blower Relay (K27) Check
- Left Blower Relay (K27) Circuit Check
- Left Blower Motor (M02) Circuit Check
- Right Blower Motor (M03) Circuit Check
- A/C On/Off Switch (S28) Circuit Check
- A/C Deicing Switch (B07) Circuit Check
- A/C High/Low Pressure Switch (B08) Circuit Check
- Wiper System Circuit Test
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F37 Circuit Check
- Key Switch (S01) Circuit Check
- Wiper System Relay (K39) Check
- Wiper System Relay (K39) Circuit Check
- Front Wiper Switch (S29) Circuit Check
- Front Wiper Motor (M05) Circuit Check
- Front Washer Pump (M06) Circuit Check
- Rear Wiper Switch (S30) Circuit Check
- Rear Wiper Motor (M07) Circuit Check
- Rear Washer Pump (M08) Circuit Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F37 Circuit Check
- Key Switch (S01) Circuit Check
- Wiper System Relay (K39) Check
- Wiper System Relay (K39) Circuit Check
- Front Wiper Switch (S29) Circuit Check
- Front Wiper Motor (M05) Circuit Check
- Front Washer Pump (M06) Circuit Check
- Rear Wiper Switch (S30) Circuit Check
- Rear Wiper Motor (M07) Circuit Check
- Rear Washer Pump (M08) Circuit Check
- Key Switch Test (Cab)
- Perform Key Switch Test
- Perform Key Switch Test
- Fuel Transfer Pump Circuit Test (Cab)
- Fuel Transfer Pump Operational Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F47 Circuit Check
- Pump Voltage Check
- Circuit 0010 Check
- Fuel Transfer Pump Relay (K31) Test
- Circuit 6396 Check
- Circuit 6395 Check
- Circuit 5012 Check
- Circuit 0010 Check
- Fuel Transfer Pump Operational Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F47 Circuit Check
- Pump Voltage Check
- Circuit 0010 Check
- Fuel Transfer Pump Relay (K31) Test
- Circuit 6396 Check
- Circuit 6395 Check
- Circuit 5012 Check
- Circuit 0010 Check
- Group 15B - Tests and Adjustments (OOS)
- Starting Circuit Test for PR (OOS)
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Start Relay (K02)
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Start Relay (K02)
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Starting Circuit Test for TSS (OOS)
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Switch(S03) Circuit Checks
- Rear PTO Switch (S02) Circuit Checks
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Power Check
- Fuse Circuit Check
- Operational Check
- Key Switch (S01) Circuit Check
- Neutral Switch(S03) Circuit Checks
- Rear PTO Switch (S02) Circuit Checks
- Starter Relay (K01) Circuit Check
- Starter (M01) Circuit Test
- Battery Inspection Test (OOS)
- Visual Battery Check
- Check Electrolyte Level of All Cells
- Check Specific Gravity of Each Cell
- Check Battery Voltage
- Charge Battery
- Select Charging Rate
- Charge Battery (Continued)
- Check Battery Condition
- Visual Battery Check
- Check Electrolyte Level of All Cells
- Check Specific Gravity of Each Cell
- Check Battery Voltage
- Charge Battery
- Select Charging Rate
- Charge Battery (Continued)
- Check Battery Condition
- Charging System Test (OOS)
- Alternator Output Test
- Alternator Output Test
- Warning Lights Circuit Test (OOS)
- Fuse Circuit Check
- Operational Check
- VEC Light Switch Power Check
- Circuit 0010 Check
- Light Switch (S08) Circuit Check
- Instrument Cluster Circuit Check
- Turn Warning Relay (K03) Check
- Left Light Relay (K04) Check
- Left Light Relay (K04) Circuit Check
- Right Light Relay (K05) Check
- Right Light Relay (K05) Circuit Check
- Fuse Circuit Check
- Operational Check
- VEC Light Switch Power Check
- Circuit 0010 Check
- Light Switch (S08) Circuit Check
- Instrument Cluster Circuit Check
- Turn Warning Relay (K03) Check
- Left Light Relay (K04) Check
- Left Light Relay (K04) Circuit Check
- Right Light Relay (K05) Check
- Right Light Relay (K05) Circuit Check
- Turn Signal Lights Circuit Test (OOS)
- Fuse Circuit Check
- Circuit 0072 Check
- Fuse F21 Circuit Check
- Turn Signal Light Switch Circuit Check
- Left Light Relay (K04) Check
- Left Light Relay (K04) Circuit Check
- Right Light Relay (K05) Check
- Right Light Relay (K05) Circuit Check
- Turn Signal Power Circuit Check
- Flash Logic Relay (K33) Check
- Turn Warning Relay (K03) Check
- Fuse Circuit Check
- Circuit 0072 Check
- Fuse F21 Circuit Check
- Turn Signal Light Switch Circuit Check
- Left Light Relay (K04) Check
- Left Light Relay (K04) Circuit Check
- Right Light Relay (K05) Check
- Right Light Relay (K05) Circuit Check
- Turn Signal Power Circuit Check
- Flash Logic Relay (K33) Check
- Turn Warning Relay (K03) Check
- Engine Speed Sensor Circuit Test (OOS)
- Power Check
- Fuse F1 Circuit Check
- Key Switch (S1) Circuit Check
- Fuse F19 Circuit Check
- Fuse F8 Circuit Check
- Engine Speed Sensor Circuit Check
- Circuit 5305 Check
- Power Check
- Fuse F1 Circuit Check
- Key Switch (S1) Circuit Check
- Fuse F19 Circuit Check
- Fuse F8 Circuit Check
- Engine Speed Sensor Circuit Check
- Circuit 5305 Check
- Engine Oil Pressure Sensor Circuit Test (OOS)
- Power Check
- Fuse F25(PR) / F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Engine Oil Pressure Sensor Check
- Circuit 5634 Check
- Circuit 5647 Check
- Power Check
- Fuse F25(PR) / F26(TSS) Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Engine Oil Pressure Sensor Check
- Circuit 5634 Check
- Circuit 5647 Check
- Air Filter Restriction Switch Circuit Test (OOS)
- Air Filter Restriction Switch Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Air Filter Restriction Switch Circuit Check
- Air Filter Restriction Switch Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Air Filter Restriction Switch Circuit Check
- Fuel Level Sender Circuit Test (OOS)
- Fuel Level Sender Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F20 Circuit Check
- Fuse F20 Circuit Check
- Fuel Level Sender Circuit Check
- Fuel Level Sender Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F50 Circuit Check
- Fuse F20 Circuit Check
- Fuel Level Sender Circuit Check
- Engine Coolant Temperature Sensor Circuit Test (OOS)
- Engine Coolant Temperature Sensor Circuit Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F20 Circuit Check
- Engine Coolant Temperature Sensor Circuit Check
- Circuit 5461 Check
- Circuit 5643 Check
- Engine Coolant Temperature Sensor Circuit Check
- Power Check
- Fuse F02 Circuit Check
- Key Switch (S01) Circuit Check
- Fuse F20 Circuit Check
- Engine Coolant Temperature Sensor Circuit Check
- Circuit 5461 Check
- Circuit 5643 Check
- Tail Light Circuit Test (OOS)
- Fuse F10 Circuit Check
- Light Switch (S08) Circuit Check
- Fuse F14 Circuit Check
- Left Tail/Turn Lamp (E17) Circuit Check
- Right Tail/Turn Lamp (E16) Circuit Check
- Fuse F10 Circuit Check
- Light Switch (S08) Circuit Check
- Fuse F14 Circuit Check
- Left Tail/Turn Lamp (E17) Circuit Check
- Right Tail/Turn Lamp (E16) Circuit Check
- Rear Work Light Circuit Test (OOS)
- Fuse F10 Circuit Check
- Fuse F13 Circuit Check
- Circuit 137 Check
- Light Switch (S08) Circuit Check
- Work Lights Relay (K06) Check
- Work Lights Relay (K06) Circuit Check
- Work Light (E20) Circuit Check
- Fuse F10 Circuit Check
- Fuse F13 Circuit Check
- Circuit 137 Check
- Light Switch (S08) Circuit Check
- Work Lights Relay (K06) Check
- Work Lights Relay (K06) Circuit Check
- Work Light (E20) Circuit Check
- Headlight and Backlighting Circuit Test (OOS)
- Fuse F10 Circuit Check
- Fuse F20 Circuit Check
- Light Switch (S08) Circuit Check
- Fuse F16 Circuit Check
- Fuse F15 Circuit Check
- Left Headlight (E06) Circuit Check
- Right Headlight (E07) Circuit Check
- Instrument Cluster (A01) Check
- Fuse F10 Circuit Check
- Fuse F20 Circuit Check
- Light Switch (S08) Circuit Check
- Fuse F16 Circuit Check
- Fuse F15 Circuit Check
- Left Headlight (E06) Circuit Check
- Right Headlight (E07) Circuit Check
- Instrument Cluster (A01) Check
- Key Switch Test (OOS)
- Perform Key Switch Test
- Perform Key Switch Test
- Fuel Transfer Pump Circuit Test (OOS)
- Fuel Transfer Pump Operational Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F47 Circuit Check
- Pump Voltage Check
- Circuit 0010 Check
- Fuel Transfer Pump Relay (K31) Test
- Circuit 6396 Check
- Circuit 6395 Check
- Circuit 5012 Check
- Circuit 0010 Check
- Fuel Transfer Pump Operational Check
- Fuse F25(PR)/F26(TSS) Circuit Check
- Fuse F47 Circuit Check
- Pump Voltage Check
- Circuit 0010 Check
- Fuel Transfer Pump Relay (K31) Test
- Circuit 6396 Check
- Circuit 6395 Check
- Circuit 5012 Check
- Circuit 0010 Check
- Group 20A - Theory of Operation (Cab)
- Starting System Operation (PR)
- Starting System Operation (TSS)
- Cold Start System Operation
- Charging System Operation
- Lighting System Operation—Turn Signals
- Lighting System Operation—Warning Lights
- Lighting System Operation—Tail Lights
- Lighting System Operation—Headlights
- Work Light and Beacon Light Operation
- Instrument Cluster Operation—Tachometer/Hour Meter
- Instrument Cluster Operation—Fuel Gauge
- Instrument Cluster Operation—Coolant Temperature Gauge
- PTO Warning System Operation
- Air Filter Restriction Indicator Operation
- Accessory Power and Junction Block Power Operation
- Blower Motor Operation
- Front Wiper/Washer Operation
- Rear Wiper/Washer Operation
- Dome Light Operation
- Wheel Speed Sensor Operation
- Group 20B - Theory of Operation (OOS)
- Starting System Operation (PR)
- Starting System Operation (TSS)
- Cold Start System Operation
- Charging System Operation
- Lighting System Operation—Turn Signals
- Lighting System Operation—Warning Lights
- Lighting System Operation—Tail Lights
- Lighting System Operation—Headlights
- Instrument Cluster Operation—Tachometer/Hour Meter
- Instrument Cluster Operation—Fuel Gauge
- Instrument Cluster Operation—Coolant Temperature Gauge
- PTO Warning System Operation
- Air Filter Restriction Indicator Operation
- Wheel Speed Sensor Operation
- Group 25A - Functional Schematics (Cab)
- Circuit Number Identification for Cab and OOS
- Functional Schematics Listing (Cab)
- Schematic and Component Identification Legend
- SE11—Engine Controller (Cab)
- SE12—Engine Controller (Cab)
- SE13—Key Switch, Starter, Alternator Circuit (PR)
- SE14—Key Switch, Starter, Alternator Circuit (TSS)
- SE15—Accessory Power, Horn, Light switch Circuit
- SE16—Turn and Hazard Light
- SE17— Tail/Brake/Clearance/Turn/License Plate Lights
- SE18— Cab Work Light and Beacon Light
- SE19—Power Source and Trailer Interface
- SE20—Power Outlet, Lighter, Heater, and air conditioning
- SE21—Windshield Wiper, Radio
- SE22—Instrument Cluster (TSS)
- SE23—Instrument Cluster (PR)
- SE24—Seat, Brake, Backup Alarm, and Wheel Speed
- SE25—Transmission Controller
- SE26—Transmission Controller (Cab)
- SE27—Can Terminators And AMS (Cab)
- Group 25B - Functional Schematics (OOS)
- Functional Schematics Listing (OOS)
- Schematic and Component Identification Legend
- SE01—Key Switch, Starter and Alternator (TSS)
- SE02—Key Switch, Starter and Alternator (PR)
- SE04—Light Circuit, SE06—Optional Work Light
- SE05—Trailer Connector, Horn & Backup Alarm
- SE07—Instrument Cluster
- SE09—Transmission Controller
- SE10—Transmission Controller
- SE11—Engine Controller (OOS)
- SE12—Engine Controller (OOS)
- Group 26A - Wiring Harnesses (Cab)
- Wiring Harnesses Schematic Listing
- Front Console Wiring Harness (PR)
- Cab Wiring Harness (PR)
- Transmission Wiring Harness (PR)
- Roof Wiring Harness
- SAE Module Wiring Harness
- Front Console Wiring Harness (TSS)
- Cab Wiring Harness (TSS)
- Group 26B - Wiring Harnesses (OOS)
- Wiring Harnesses Schematic Listing
- Console Wiring Harness (PR)
- Transmission Wiring Harness (PR)
- Console Wiring Harness (TSS)
- Transmission Wiring Harness (TSS)
- Head Lamp Wiring Harness
- Group 35A - Connector Information (Cab)
- Roof Harness Connector-to-Cab Harness Connector 1
- Roof Harness Connector-to-Cab Harness Connector 2
- Front Console-to-Cab Harness Connector 1
- Front Console-to-Cab Harness Connector 2
- Front Console-to-Cab Harness Connector 3
- Transmission Harness-to-Transmission Harness Connector 1
- Transmission Harness-to-Transmission Harness Connector 2
- Group 35B - Connector Information (OOS)
- Front Console-to-Rear Harness Connector 1
- Front Console-to-Rear Harness Connector 2
- Console-to-Rear Harness Connector 1
- Console-to-Rear Harness Connector 2
- Console-to-Hood Harness Connector
- Section 245 - CONTROL UNITS
- Group 05 - General References
- Electro-Hydraulic Controller General Information
- Performance Monitor General Operation
- General Information
- Access Addresses Using Service ADVISOR™
- Access Addresses Using On-Board Diagnostics
- Access Addresses Using Performance Monitor
- Access Addresses Using Service ADVISOR™
- Access Addresses Using On-Board Diagnostics
- Access Addresses Using Performance Monitor
- General Information
- Recall, Record, and Clear Codes Using Service ADVISOR™
- Recall, Record, and Clear Codes Using On-Board Diagnostics
- Recall, Record, and Clear Codes Using Performance Monitor
- Recall, Record, and Clear Codes Using Service ADVISOR™
- Recall, Record, and Clear Codes Using On-Board Diagnostics
- Recall, Record, and Clear Codes Using Performance Monitor
- Diagnostic Trouble Code Listing
- CCU Code List
- ECU Code List
- EIC Code List
- ICC Code List
- PTR Code List
- Control Unit Addresses
- CCU Address List
- ECU Address List
- EIC Address List
- ICC Address List
- PTR Address List
- Programming Control Units
- Connect Service ADVISORService ADVISOR is a trademark of Deere & Company to Software Delivery System on Internet
- Identify Electro-Hydraulic Control Unit Software Downloads
- Download Software from Software Delivery System
- Prepare Service ADVISOR Equipment for Connection to Vehicle
- Connect Service ADVISOR to Vehicle
- Program Control Unit with Software Payload
- Input previously recorded addresses
- Connect Service ADVISORService ADVISOR is a trademark of Deere & Company to Software Delivery System on Internet
- Identify Electro-Hydraulic Control Unit Software Downloads
- Download Software from Software Delivery System
- Prepare Service ADVISOR Equipment for Connection to Vehicle
- Connect Service ADVISOR to Vehicle
- Program Control Unit with Software Payload
- Input previously recorded addresses
- CAN Lo and CAN Hi Voltage Checks
- Check CAN Lo (-) and CAN Hi (+) Voltages
- Compare CAN Hi and CAN Lo Voltages
- Check CAN Lo (-) and CAN Hi (+) Voltages
- Compare CAN Hi and CAN Lo Voltages
- CAN Communication System Theory of Operation
- VIN Security Fault Diagnosis
- VIN Network Address Checks
- VIN Network Address Checks
- Group 15 - Tests and Adjustments
- Electro-Hydraulic Controller Switched Supply Voltage and Ground Test
- Preliminary Check
- ELX Relay Check
- Preliminary Check
- ELX Relay Check
- Electro-Hydraulic Controller Unswitched Supply Voltage and Ground Test
- Preliminary Check
- Battery Check
- Electrical Circuit Checks
- Preliminary Check
- Battery Check
- Electrical Circuit Checks
- Open Circuit Load Test
- ECU-Engine Control Unit Test
- Preliminary Check
- Power Circuit Check
- Ground Circuit Check
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Power Circuit Check
- Ground Circuit Check
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- EHC-Electrohydraulic Control Unit Test
- Preliminary Check
- Power Circuit Check
- Ground Circuit Check
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Power Circuit Check
- Ground Circuit Check
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- ICC-Instrument Cluster Control Unit Test
- Preliminary Check
- Power Circuit Test
- Ground Circuit Test
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- Preliminary Check
- Power Circuit Test
- Ground Circuit Test
- Inspect All Non-Factory Installed Equipment
- Non-Factory Equipment Diagnosis
- Additional Checks and Intermittent Failure Evaluation
- Group CCU - CCU
- CCU—Calibratable Addresses
- Clear Codes
- Enter Calibration Mode
- MFWD Configuration
- Rear PTO Setup #1 Configuration
- Rear PTO Setup #2 Configuration
- Engine Pulses Per Gear Revolution Configuration
- Rear PTO Pulses Per PTO Shaft Revolution Configuration
- Wheel Speed Pulses Per Axle Revolution Configuration
- Tire Rolling Circumference Configuration
- Clear Codes
- Enter Calibration Mode
- MFWD Configuration
- Rear PTO Setup #1 Configuration
- Rear PTO Setup #2 Configuration
- Engine Pulses Per Gear Revolution Configuration
- Rear PTO Pulses Per PTO Shaft Revolution Configuration
- Wheel Speed Pulses Per Axle Revolution Configuration
- Tire Rolling Circumference Configuration
- Power Train Reverser (PTR) Control Unit Configuration and Calibration Addresses
- Calibration Address
- Configurable Addresses
- Calibration Address
- Configurable Addresses
- CCU-MFWD Solenoid Circuit Test (PR Transmission)
- Operational Check
- Coil Resistance Check
- Operational Check
- Coil Resistance Check
- CCU-Sensor Excitation Circuit Test (PR Transmission)
- Fuse F20 Check
- Fuse F03 Check
- Relay K11 Power Check
- Circuit 6572 Check
- Key Switch S01 Check
- Fuse F20 Check
- Fuse F03 Check
- Relay K11 Power Check
- Circuit 6572 Check
- Key Switch S01 Check
- CCU-Rear PTO Solenoid Circuit Test (PR Transmission)
- Preliminary Check
- Switch Supply Voltage Test
- Preliminary Check
- Switch Supply Voltage Test
- CCU-Rear PTO Speed Sensor Circuit Test (PR Transmission)
- Preliminary Check
- Sensor Feedback Circuit Test
- Ground Circuit Check
- Preliminary Check
- Sensor Feedback Circuit Test
- Ground Circuit Check
- CCU-Secondary Brake Switch Circuit Test (PR Transmission)
- Operational Check
- Fuse F20 Check
- Secondary Brake Switch Test
- Operational Check
- Fuse F20 Check
- Secondary Brake Switch Test
- CCU-Differential Lock Switch Circuit Test (PR Transmission)
- Operational Check
- Fuse F20 Check
- Relay K11 Check
- Differential Lock Switch Test
- Operational Check
- Fuse F20 Check
- Relay K11 Check
- Differential Lock Switch Test
- CCU-Differential Lock Solenoid Circuit Test (PR Transmission)
- Preliminary Check
- Switch Supply Voltage Test
- Preliminary Check
- Switch Supply Voltage Test
- CCU-Fuel Level Sensor Circuit Test (PR Transmission)
- Preliminary Check
- Circuit Check
- Sensor Feedback Circuit Test
- Sensor Ground Circuit Test
- Preliminary Check
- Circuit Check
- Sensor Feedback Circuit Test
- Sensor Ground Circuit Test
- CCU-Remote PTO Enable Switch Circuit Test (PR Transmission)
- Operational Check
- Fuse F20 Check
- Remote PTO Enable Switch Test
- Operational Check
- Fuse F20 Check
- Remote PTO Enable Switch Test
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Status/Beep Address
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- CCU 180 — Not Used
- CCU 200-251 — General Control Unit Data
- CCU System Diagnostic Beep Mode
- Access System Diagnostic Beep Mode (Address 002)
- Operate Beep Mode Supported Controls
- Harness/Connection Check
- Access System Diagnostic Beep Mode (Address 002)
- Operate Beep Mode Supported Controls
- Harness/Connection Check
- CCU - Beep Mode Test Without Speed Sensors
- CCU - Hydraulic Oil Temperature Sensor Circuit Test
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Component Output Circuit Test
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Component Output Circuit Test
- CCU - Engine Speed Sensor Circuit Test
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Ground Circuit Check
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Ground Circuit Check
- CCU - Wheel Speed Sensor Circuit Test
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Ground Circuit Test
- Component Output Circuit Test
- Operational Check
- Access Component to Be Tested
- Install Test Equipment
- Component Supply Voltage Test
- Ground Circuit Test
- Component Output Circuit Test
- CCU - Controller Theory of Operation
- CCU - Hydraulic Oil Temperature Sensor Theory of Operation
- CCU - Engine Speed Sensor Theory of Operation
- CCU - Wheel Speed Sensor Theory of Operation
- Hydraulic Oil Temperature Sensor Diagnostic Wiring Diagram (Cab)
- Hydraulic Oil Temperature Sensor Diagnostic Wiring Diagram (OOS)
- Group EIC - EIC
- 000—Device ID Address
- Status Address
- Address Procedure
- Address Procedure
- EIC 002—EIC System Beep Mode
- EIC 004—Index to CAN Debug Request Record
- EIC 005—Contents of CAN Debug Request Record
- EIC 040—After Treatment Service Cleaning Enable
- EIC 041 - Automatic Exhaust Filter Cleaning, Configuration
- EIC 050—Hand Throttle Scaled Percent
- EIC 051—Foot Throttle Scaled Percent
- EIC 052—Hand Throttle Basic Engine Speed
- EIC 053—Foot Throttle Basic Engine Speed
- EIC 058—Final Commanded Engine Speed
- EIC 059—Actual Engine Speed
- EIC 060—Engine Hours
- EIC 061—Vehicle Hours
- EIC 070—Intelligent Power Management Status
- EIC 072—Unfiltered Rear PTO Power
- EIC 073—Unfiltered Front PTO Power
- EIC 075—Intelligent Power Management PTO Boost Status
- EIC 076—Intelligent Power Management PTO Boost Percent
- EIC 077—Intelligent Power Management PTO Boost Power
- EIC 078—Intelligent Power Management Estimated PTO Power
- EIC 079—Intelligent Power Management Filtered Front PTO Power
- EIC 080—Intelligent Power Management Transport Boost Status
- EIC 081—Intelligent Power Management Transport Boost Percent
- EIC 082—Intelligent Power Management Transport Boost Power
- EIC 095 - Fan Package Selection
- EIC 096 - Parasitic Fan Power
- EIC 097 - Fan Speed
- EIC 100—Current Key ID
- EIC 101—Key ID #1
- EIC 102—Key ID #2
- EIC 103—Key ID #3
- EIC 104—Key ID #4
- EIC 105—Key ID #5
- EIC 106—Key Identification Request
- EIC 110—Number of Programmed Keys
- EIC 111—Key Number 1—5
- EIC 112—Immobilizer Control Device Secure Code Status
- EIC 113—Immobilizer Control Device CAN Speed Rate
- EIC 114—Immobilizer Control Device Error Code
- EIC 115—Immobilizer Control Device Hardware Version Number
- EIC 116—Immobilizer Control Device Software Version Number
- EIC 180—Field Cruise On/Off
- EIC 181—Field Cruise Engine Speed Limit
- EIC 182—IPM On/Off
- EIC 183—Aftertreatment Operator Setting Disabled/Inhibited
- 200—251—Control Unit General Data
- Group ICC - ICC
- ICC Diagnostic Procedure
- ICC Configuration Addresses
- ICC Calibration Addresses
- ICC Configuration Addresses
- ICC Calibration Addresses
- Status Address
- Address Description
- Address Description
- Status Address
- Address Procedure
- Address Procedure
- Status/Beep Address
- Address Procedure
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Address Procedure
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Status/Beep Address
- Address Procedure
- Address Procedure
- Status/Beep Address
- Address Procedure
- Address Procedure
- Status/Beep Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- Configuration Address
- Address Procedure
- Address Procedure
- ICC 200-248 — General Control Unit Data
- Group PTR - PTR
- PTR—Calibratable Addresses
- Clear Codes
- Automatic Overfill Protection Enable
- Transmission Configuration
- Prepare Vehicle for Transmission Calibration
- Heat Hydraulic Oil
- Hydraulic Oil Type Selection
- Alternate Oil Temperature Offset Configuration
- Transmission Interactive Calibration
- Control Unit Calibration Faults
- Element Calibration Faults
- Forward Fill Pressure Adjustment
- Reverse Fill Pressure Adjustment
- Forward Fill Time Adjustment
- Reverse Fill Time Adjustment
- Infinitely Variable Shuttle Control Configuration
- Pressure Used when Below Wheel Speed Threshold (Infinitely Variable Shuttle)
- Infinitely Variable Shuttle Wheel Speed Threshold
- Hi/Lo Configuration
- Park Switch Polarity
- Seat Switch Polarity
- Come-Home Mode Enable
- CAN Bus Error Limiting Factor Configuration
- CAN Bus Error Retry Time Configuration
- Vehicle Model Number
- Vehicle Model Number
- Clear Codes
- Automatic Overfill Protection Enable
- Transmission Configuration
- Prepare Vehicle for Transmission Calibration
- Heat Hydraulic Oil
- Hydraulic Oil Type Selection
- Alternate Oil Temperature Offset Configuration
- Transmission Interactive Calibration
- Control Unit Calibration Faults
- Element Calibration Faults
- Forward Fill Pressure Adjustment
- Reverse Fill Pressure Adjustment
- Forward Fill Time Adjustment
- Reverse Fill Time Adjustment
- Infinitely Variable Shuttle Control Configuration
- Pressure Used when Below Wheel Speed Threshold (Infinitely Variable Shuttle)
- Infinitely Variable Shuttle Wheel Speed Threshold
- Hi/Lo Configuration
- Park Switch Polarity
- Seat Switch Polarity
- Come-Home Mode Enable
- CAN Bus Error Limiting Factor Configuration
- CAN Bus Error Retry Time Configuration
- Vehicle Model Number
- Vehicle Model Number
- Power Train Reverser (PTR) Control Unit Configuration and Calibration Addresses
- Calibration Address
- Configurable Addresses
- Calibration Address
- Configurable Addresses
- PTR-Clutch Enable Pressure Sensor Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- PTR-Clutch Enable Solenoid Circuit Test
- Operational Check
- Coil Resistance Check
- Operational Check
- Coil Resistance Check
- PTR-Clutch Pedal Position Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- PTR-Clutch Pedal Switch Circuit Test
- Operational Check
- Circuit Checks
- Operational Check
- Circuit Checks
- PTR-Forward Neutral Reverse (FNR) Switch Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Component Output Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Component Output Circuit Test
- PTR-High-Low Shifter Switch Circuit Test
- Operational Check
- Switch Supply Voltage Test
- Operational Check
- Switch Supply Voltage Test
- PTR-Park Switch Circuit Test
- Operational Check
- Component Supply Voltage Check
- Component Output Circuit Check
- Component Check
- Operational Check
- Component Supply Voltage Check
- Component Output Circuit Check
- Component Check
- PTR-Power Shuttle Control Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- PTR-Start Signal Circuit Test
- Voltage Check
- Circuit Test
- Voltage Check
- Circuit Test
- PTR-Top Shaft Speed Sensor Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- Operational Check
- Sensor Supply Voltage Test
- Ground Circuit Check
- Component Output Circuit Test
- PTR-Transmission Forward Solenoid Circuit Test (High)
- Operational Check
- Solenoid Check
- Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- Continuity Check
- Relay Check
- Relay Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- Operational Check
- Solenoid Check
- Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- Continuity Check
- Relay Check
- Relay Circuit Check
- Relay Circuit Check
- Relay Circuit Check
- PTR-Transmission Forward Solenoid Circuit Test (Low)
- Operational Check
- Coil Resistance Check
- Operational Check
- Coil Resistance Check
- PTR-Transmission Reverse Solenoid Circuit Test
- Operational Check
- Coil Resistance Check
- Operational Check
- Coil Resistance Check
- PTR-Speed Lever Neutral Switch Circuit Test
- Operational Check
- Component Supply Voltage Check
- Component Check
- Operational Check
- Component Supply Voltage Check
- Component Check
- Status Address
- Address Description
- Address Description
- Status Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Status/Beep Address
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Address Description
- Operate Beep Mode Supported Controls
- Harness / Connection Check
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Reading/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Procedure
- Address Procedure
- Reading/Beep Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configurable Addresses
- Clear Codes
- Enter Configuration Addresses
- Prepare Vehicle for Transmission Calibration
- Heat Hydraulic Oil
- Hydraulic Oil Type Selection
- Transmission Interactive Calibration
- Control Unit Calibration Faults
- Element Calibration Faults
- Clear Codes
- Enter Configuration Addresses
- Prepare Vehicle for Transmission Calibration
- Heat Hydraulic Oil
- Hydraulic Oil Type Selection
- Transmission Interactive Calibration
- Control Unit Calibration Faults
- Element Calibration Faults
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Reading/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Status/Beep Address
- Address Description
- Address Description
- Reading/Beep Address
- Address Description
- Address Description
- Reading/Beep Address
- Address Description
- Address Description
- Reading/Beep Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- Configuration Address
- Address Description
- Address Description
- PTR 200-251 — General Control Unit Data
- PTR System Diagnostic Beep Mode
- Access System Diagnostic Beep Mode (Address 002)
- Operate Beep Mode Supported Controls
- Harness/Connection Check
- Access System Diagnostic Beep Mode (Address 002)
- Operate Beep Mode Supported Controls
- Harness/Connection Check
- PTR - Control Unit Beep Mode Test Without Speed Sensors
- PTR - Control Unit Theory of Operation
- PTR - Directional Reverser Switch Theory of Operation
- PTR - Clutch Disengaged Switch Theory of Operation
- PTR - Optional Infinitely Variable Shuttle Control Theory of Operation
- PTR - Park Switch Theory of Operation
- PTR - Seat Switch Theory of Operation
- PTR - Forward Solenoid Theory of Operation
- PTR - Reverse Solenoid Theory of Operation
- PTR - Clutch Enable Proportional Valve Theory of Operation
- PTR - Clutch Pedal Position Sensor Theory of Operation
- PTR - Enable Pressure Sensor Theory of Operation
- PTR - Countershaft Speed Sensor Theory of Operation
- Clutch Enable Proportional Valve Diagnostic Wiring Diagram (Cab)
- Clutch Enable Proportional Valve Diagnostic Wiring Diagram (OOS)
- Clutch Pedal Position Sensor Diagnostic Wiring Diagram (Cab)
- Clutch Pedal Position Sensor Diagnostic Wiring Diagram (OOS)
- Park Switch Diagnostic Wiring Diagram (Cab)
- Park Switch Diagnostic Wiring Diagram (OOS)
- Optional Infinitely Variable Shuttle Control Diagnostic Wiring Diagram (Cab)
- Optional Infinitely Variable Shuttle Control Diagnostic Wiring Diagram (OOS)
- Forward Solenoid Diagnostic Wiring Diagram (Cab)
- Forward Solenoid Diagnostic Wiring Diagram (OOS)
- Reverse Solenoid Diagnostic Wiring Diagram (Cab)
- Reverse Solenoid Diagnostic Wiring Diagram (OOS)
- Section 255A - POWRREVERSER™ TRANSMISSION
- Group 05 - General Information
- PowrReverser™ Transmission Identification
- Install Test Equipment - Transmission
- Install Test Equipment
- PR Control Valve Test Port Locations
- Junction Block Test Port Location
- PR Control Valve Test Connections
- PR Pump Test Connections
- Junction Block Test Connection
- Install Test Equipment
- PR Control Valve Test Port Locations
- Junction Block Test Port Location
- PR Control Valve Test Connections
- PR Pump Test Connections
- Junction Block Test Connection
- Group 10 - Preliminary and Operational Checks
- PR Transmission Preliminary Checks
- Operational Checks
- Set-up for Operational Checks
- Check for all Speeds and Ranges
- Modulation Checks
- Range Shift Checks
- Clutch Checks
- Differential Lock, MFWD, and PTO Checks
- Set-up for Operational Checks
- Check for all Speeds and Ranges
- Modulation Checks
- Range Shift Checks
- Clutch Checks
- Differential Lock, MFWD, and PTO Checks
- Group 15 - Tests and Adjustments
- PowrReverser™ Control Valve Tests
- Prepare Tractor and Install Test Equipment
- EH Directional Reverser Lever in Neutral
- Causes for Low Pump Pressure
- Causes for Low Lubrication Pressure
- EH Directional Reverser Lever in Forward, Clutch Pedal Up
- Causes for Low Forward Pressure
- Causes for Low Lubrication Pressure
- EH Directional Reverser Lever in Reverse, Clutch Pedal Up
- Causes for Low Reverse Pressure
- Causes for Low Lubrication Pressure
- Prepare Tractor and Install Test Equipment
- EH Directional Reverser Lever in Neutral
- Causes for Low Pump Pressure
- Causes for Low Lubrication Pressure
- EH Directional Reverser Lever in Forward, Clutch Pedal Up
- Causes for Low Forward Pressure
- Causes for Low Lubrication Pressure
- EH Directional Reverser Lever in Reverse, Clutch Pedal Up
- Causes for Low Reverse Pressure
- Causes for Low Lubrication Pressure
- PR Pump Flow Test
- Prepare Tractor and Install Test Equipment
- PR Pump Flow Check
- Causes for Low Pump Flow
- Prepare Tractor and Install Test Equipment
- PR Pump Flow Check
- Causes for Low Pump Flow
- PR Main Pressure Relief Valve Adjustment
- Transmission System Pressure Test
- Install Test Equipment
- Preliminary Pressure Check
- Install Test Equipment
- Preliminary Pressure Check
- PTO Clutch Leak Test
- Install Test Equipment
- NO Pressure Dip
- Install Test Equipment
- PTO Clutch Leak Check Continued
- Install Test Equipment
- NO Pressure Dip
- Install Test Equipment
- PTO Clutch Leak Check Continued
- Checking and Adjusting Clutch Pedal Free Play
- Group 20 - Theory of Operation
- PowrReverser™ Transmission Theory of Operation
- Group 25 - Schematics and Diagrams
- PowrReverser™ Transmission Component Location Listing
- PR Transmission Hydraulic Schematic
- Power Train Components
- PowrReverser™ Components
- Transmission Components
- Section 255B - TSS TRANSMISSION
- Group 15 - Tests and Adjustments
- TSS Transmission Tests and Adjustments Reference Listing
- Checking and Adjusting Clutch Pedal Free Play
- Group 20 - Theory of Operation
- TSS Transmission Theory of Operation
- Group 25 - Schematics and Diagrams
- Component Location Information
- Section 256 - DRIVE SYSTEMS
- Group 05 - General Information
- Install Test Equipment - Drive System
- Install Test Equipment Listing
- ElectroHydraulic PTO Valve Test Port Locations
- ElectroHydraulic PTO Valve Test Connections
- Install Test Equipment Listing
- ElectroHydraulic PTO Valve Test Port Locations
- ElectroHydraulic PTO Valve Test Connections
- Group 10 - Preliminary and Operational Checks
- Preliminary Checks - Drive System
- Preliminary Checks
- Preliminary Checks
- Rear Differential Lock Operational Check
- Perform Rear Differential Lock Operational Check
- Perform Rear Differential Lock Operational Check
- PTO Operational Checks
- PTO Indicator Light Check
- PTO Operational Check—Mechanical PTO
- PTO Indicator Light Check
- PTO Operational Check—Mechanical PTO
- MFWD Operational Checks
- Group 15 - Tests and Adjustments
- MFWD Troubleshooting
- PTO Clutch Lever Linkage Adjustment
- PTO 540/540E Lever and Linkage Adjustment
- Group 20 - Theory of Operation
- Drive Systems Theory of Operation Reference Listing
- Group 25 - Schematics and Diagrams
- Drive Systems Component Location Listing
- Final Drive Components
- 540/540E Mechanical PTO Components
- Section 260 - STEERING AND BRAKES
- Group 05 - General Information
- Install Test Equipment - Steering and Brake
- Steering Pump Flow Test Connections
- Steering Relief Valve Test Connections
- Brake Retractor Adjustment Test Connections
- Steering Pump Flow Test Connections
- Steering Relief Valve Test Connections
- Brake Retractor Adjustment Test Connections
- Group 10 - Preliminary and Operational Checks
- Steering Preliminary Check
- Preliminary Check
- Preliminary Check
- Steering Operational Check
- Operational Check
- Operational Check
- Rear Brakes Preliminary Check
- Rear Brake Operational Test
- Rear Brake Operational Check
- Rear Brake Operational Check
- Group 15 - Test and Adjustments
- Steering Pump Flow Test
- Perform Steering Pump Flow Test
- Perform Steering Pump Flow Test
- Steering Valve Relief Test
- Perform Steering Valve Relief Test
- Perform Steering Valve Relief Test
- Steering Leak Test
- Steering System Leak Test
- Steering Valve Leakage Test
- Steering System Leak Test
- Steering Valve Leakage Test
- Checking Toe-In—MFWD Axle
- Adjusting Toe-In—MFWD Axle
- Set MFWD Steering Stops Turning Radius
- Bleed Rear Brakes
- Bleed Brakes
- Bleed Brakes
- Rear Brake Valve Leak Test
- Brake Valve Leak Test
- Brake Valve Leak Test
- Brake Pedal Adjustment
- Adjust Brake Retractors
- Group 20 - Theory of Operation
- Steering Valve Operation—Park Position and Manual Turning
- Steering Valve Operation—Power Turning
- Hydraulic Brake System Operation
- Brake Valve Operation
- Section 270 - HYDRAULICS
- Group 05 - General Information
- Install Test Equipment - Hydraulics
- Install Test Equipment Listing
- Pump Flow Test Connections (With SCV)
- Main Relief Valve Test Connections (With SCV)
- Rockshaft Leakage Test Plug Installation
- Install Test Equipment Listing
- Pump Flow Test Connections (With SCV)
- Main Relief Valve Test Connections (With SCV)
- Rockshaft Leakage Test Plug Installation
- Warming Transmission/Hydraulic System Oil
- Group 10 - Preliminary and Operational Checks
- Hydraulic System Preliminary Checks
- Basic Hydraulic Function Checks
- Basic Hydraulic Function Checks
- Operational Checks
- Transmission and Hydraulic Oil Check
- Hydraulic System Check
- Mechanical Hitch Check
- Rear SCV Check
- Transmission and Hydraulic Oil Check
- Hydraulic System Check
- Mechanical Hitch Check
- Rear SCV Check
- Group 15 - Tests and Adjustments
- Pump Flow Test (Tractors With SCV)
- Install Test Equipment
- Pump Flow Test (With SCV)
- Install Test Equipment
- Pump Flow Test (With SCV)
- Main Relief Valve Test (Tractors With SCV)
- Install Test Equipment
- Main Relief Valve Test (With SCV)
- Install Test Equipment
- Main Relief Valve Test (With SCV)
- SCV Leakage Test
- Install Test Equipment
- Perform SCV Leakage Test
- Install Test Equipment
- Perform SCV Leakage Test
- Rockshaft Leakage Test
- Install Test Equipment
- Rockshaft Cylinder Leakage Test
- Rockshaft Valve Leakage Test
- Install Test Equipment
- Rockshaft Cylinder Leakage Test
- Rockshaft Valve Leakage Test
- Rockshaft Lift Cycle Test
- Perform Rockshaft Lift Cycle Test
- Perform Rockshaft Lift Cycle Test
- Mid-Mount Control Valve Cable Adjustment
- Rear SCV Cable Adjustment
- Rockshaft Position-Sensing Feedback Linkage Adjustment
- Rockshaft Draft-Sensing Feedback Linkage Adjustment
- Rockshaft Lever Friction Adjustment
- Group 20 - Theory of Operation
- Hydraulic System Theory of Operation Information Reference Listing
- Hydraulic System Operation
- Hydraulic Filter Operation
- Hydraulic Pump Operation
- Rockshaft Control Valve Operation—Neutral Phase
- Rockshaft Control Valve Operation—Delivery Phase
- Rockshaft Control Valve Operation—Discharge Phase
- Main Relief Valve Operation
- Rate-of-Drop Valve Operation
- Surge Relief Valve Operation
- Rockshaft Draft-Sensing Operation
- Selective Control Valve—Neutral Position
- Selective Control Valve—Retract Position
- Selective Control Valve—Extend Position
- Selective Control Valve—Float Position
- Dual Mid-Mount Control Valve Operation—Neutral Position
- Dual Mid-Mount Control Valve Operation—Extend and Retract Positions
- Dual Mid-Mount Control Valve Operation—Float Position
- Dual Mid-Mount Control Valve Operation—Regenerative Position
- Quick Disconnect Coupler Operation (Mid-Mount Control Valve)
- Quick Disconnect Coupler Operation (Rear SCV)
- Section 290 - OPERATOR′S STATION
- Group 05 - General Information
- Operator Station- Install Test Equipment
- Install Test Equipment
- Install Test Equipment
- Group 10 - Preliminary and Operational Checks
- A-C System Preliminary Checks
- System Inspection
- System Inspection
- Air Conditioning Operational Checks
- Blower Motor Check
- Blower Motor Purge Check
- Blower Function Check
- Compressor Clutch Engagement Check
- Air Duct Distribution Check
- System Cooling Checks
- Temperature Drop Check
- Engine Temperature Check
- Heater Valve Operational Check
- Blower Motor Check
- Blower Motor Purge Check
- Blower Function Check
- Compressor Clutch Engagement Check
- Air Duct Distribution Check
- System Cooling Checks
- Temperature Drop Check
- Engine Temperature Check
- Heater Valve Operational Check
- Group 15 - Tests and Adjustments
- HVAC Circulation Blower Motor Circuit Test
- K26 Relay Check
- Blower Speed Control Test
- Blower Resistor Circuit Check
- Resistor Test
- K27 and K28 Relays Check
- Circuit 2213 and 2217 Test
- K26 Relay Check
- Blower Speed Control Test
- Blower Resistor Circuit Check
- Resistor Test
- K27 and K28 Relays Check
- Circuit 2213 and 2217 Test
- HVAC Compressor Clutch Engagement and Cycle Test
- Clutch Cycle Check
- Causes for Improper Clutch Cycling
- Leak Checks
- Add Refrigerant
- Power to Compressor Clutch
- Check Power to A/C Switch
- Temperature Control Switch Circuit Check
- Temperature Control Switch Check
- Pressure Switch Circuit Test
- Circuit 216
- Compressor Clutch Coil and Diode Test
- Check Compressor Coil Ground
- Check Clutch Air Gap
- Dual Pressure Switch (Low Side) Check
- Dual Pressure Switch (High Side) Check
- Clutch Cycle Check
- Causes for Improper Clutch Cycling
- Leak Checks
- Add Refrigerant
- Power to Compressor Clutch
- Check Power to A/C Switch
- Temperature Control Switch Circuit Check
- Temperature Control Switch Check
- Pressure Switch Circuit Test
- Circuit 216
- Compressor Clutch Coil and Diode Test
- Check Compressor Coil Ground
- Check Clutch Air Gap
- Dual Pressure Switch (Low Side) Check
- Dual Pressure Switch (High Side) Check
- HVAC System Pressure Check
- System Pressure Check
- Possible Causes for Suction Low, Normal, or High and Discharge High
- Possible Causes for Suction High and Discharge Low
- Possible Causes for Suction Normal or High and Discharge High
- Charge System
- Check Expansion Valve Operation
- Pressure Does Not Change
- Possible Causes for Suction Low or Vacuum and Discharge Normal or Low
- Heat Up Evaporator
- Internal Line Restriction Check
- Possible Causes for Poor Cooling
- System Pressure Check
- Possible Causes for Suction Low, Normal, or High and Discharge High
- Possible Causes for Suction High and Discharge Low
- Possible Causes for Suction Normal or High and Discharge High
- Charge System
- Check Expansion Valve Operation
- Pressure Does Not Change
- Possible Causes for Suction Low or Vacuum and Discharge Normal or Low
- Heat Up Evaporator
- Internal Line Restriction Check
- Possible Causes for Poor Cooling
- HVAC Temperature Drop Check
- Temperature Drop Check
- Heater Shutoff Valve Leak Check
- Engine Coolant Is Not Shut Off
- Excessive Air Leakage from Cab
- Possible Causes for Lack of Cooling
- Internal Line Restriction Check
- Possible Causes for Poor Cooling
- Temperature Drop Check
- Heater Shutoff Valve Leak Check
- Engine Coolant Is Not Shut Off
- Excessive Air Leakage from Cab
- Possible Causes for Lack of Cooling
- Internal Line Restriction Check
- Possible Causes for Poor Cooling
- Summary of A-C Testing
- Summary of Air Conditioning Testing
- Summary of Air Conditioning Testing
- A-C System Moisture Removal Procedure
- Removing Moisture from System
- Removing Moisture from System
- Adjust Heater Temperature Control Cable
- Adjust A/C Temperature Control Switch
- Group 20 - Theory of Operation
- Air Conditioning Theory of Operation
- Section 299 - SERVICE TOOLS
- Group 05 - Dealer-Fabricated Tools
- DFRW26—Test Lead for Automotive-Style Fuses
- DFRW51—Electronic Circuit Load Tester
- DFRW126—Modified Tap Out Harness
- DFRW133—Tap Out Harness
- Group 10 - Service Tools and Kits
- AR94522—ISO SCV Coupler
- JDG774—Solenoid Test Harness
- JT02051—Manifold with Gauges
- JT02081—Halogen Leak Detector
- JT02153—Current Clamp-On Probe
- JT03043—Adapter 1/2 M NPT x 1-1/16 M 37°
- JT03044—Adapter 3/4 M NPT x 1-1/16 M 37°
- JT03051—Adapter 1-1/16 F 37° x 1-1/16 F 37°
- JT03059—90° Elbow, 1 1/16-12 M 37° x 1 1/16-12 F 37° Sw
- JT03110—Adapter
- JT03262—Adapter
- JT03345—Gauge
- JT03364—Hose with Coupler
- JT03367—Connector
- JT03481—Kit
- JT03481-1—Adapter Male Quick Coupler Plug x 1/4 M NPT
- JT03481-3—Straight Fitting 3/4-14 F NPT x M20 x 1.5 ORB
- JT03481-4—Straight Fitting 1/8 M BSPT X 1/8 F NPT
- JT03520—Special Adapter
- JT05473—Gauge w/Quick Coupler, 0-35,000 kPa (0-5000 psi)
- JT05494—7/16-20 M 37° x 3/4-16 M ORB
- JT05498—Hose 508 mm (20 in.)
- JT05634—Pressure Gauge
- JT05685—Battery Load Tester
- JT05690—1 1/16-12 M 37° x 1 3/16-12 F ORFS
- JT05791—Digital Multimeter
- JT05843—Hydrometer
- JT07032—Gauge 400 kPa (60 psi)
- JT07041—Gauge 2800 kPa (400 psi)
- JT07148—Digital Hydraulic Tester

📚 Step-by-Step Instructions with Detailed Pictures:

No more guesswork! Our JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619) provides crystal-clear guidance, accompanied by detailed images, making every repair and service procedure a breeze.

📲 Download and Keep Forever:

Once downloaded, it is yours to keep forever! Print it out, or view it on your PC, Mac, tablet, or smartphone-whichever suits your preference!

🚙 All Models, Engines, Trims, and Transmissions Covered:

No matter your vehicle's make or model, our JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619) has you covered from A to Z. With detailed instructions for every aspect of servicing and repairs, you'll be back on the road in no time.

⚡ Instant Delivery, Guaranteed Satisfaction:

Receive your JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619) instantly via email upon payment confirmation. We stand behind our product, ensuring your satisfaction with every purchase.

💻 Compatible with All Devices:

Whether you are on a PC, Mac, tablet, or smartphone, JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619) is compatible with all platforms. Most manuals are in PDF format, and all you need is Adobe Reader, which is often pre-installed or available for free download. If the manual is in a different format, it will be specified in the title.

Don't let repair costs hold you back - empower yourself with our JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619) today!

🔧 Start Saving and Get Yours Now!

DOWNLOAD NOW JOHN DEERE 5045E, 5055E, 5065E & 5075E (FT4) TRACTOR NA (DIAGNOSTIC, OPERATION AND TEST) SERVICE REPAIR MANUAL (TM901619)